Solved

what is the command to check etherchannel ports bandwidth ??

  • 25 November 2019
  • 2 replies
  • 890 views

what is the command to check etherchannel ports bandwidth ?? it is not showing the combined bandwidth of the bundled ports.. plzzz suggest

icon

Best answer by Alexandr P 26 November 2019, 08:06

Hello, Deepak!

 

You can use python script - https://github.com/extremenetworks/ExtremeScripting/tree/master/EXOS/Python/LAGUtil

 

X670.2 # run script LAGUtil

Lag total utilization % Mar 27 2017 09:33:42

LAG (Total Speed) Rx (%) Tx (%)
=======================================================
1 1Gb 68.58 2.06
49 80Gb 0.07 7.49
=======================================================

 

Thank you!

View original

2 replies

Userlevel 6

Hello deepak,

 

There is no command to check the total aggregate bandwidth of a load sharing group.

 

Thank you,

Brad

Userlevel 6

Hello, Deepak!

 

You can use python script - https://github.com/extremenetworks/ExtremeScripting/tree/master/EXOS/Python/LAGUtil

 

X670.2 # run script LAGUtil

Lag total utilization % Mar 27 2017 09:33:42

LAG (Total Speed) Rx (%) Tx (%)
=======================================================
1 1Gb 68.58 2.06
49 80Gb 0.07 7.49
=======================================================

 

Thank you!

Reply