Header Only - DO NOT REMOVE - Extreme Networks

How to share Fiber uplink port in Extreme 220 Edge switches


Userlevel 1
Hi,
I have Extreme Edge switch 220 series. I have configured 2 fiber uplink ports of the same switch. I need to share an uplink port. How to share fiber uplink port of Edge switch 220?

7 replies

Userlevel 2
Niyas - What exactly do you mean by "share a port"?
Userlevel 1
Hi,
I have 2 Extreme summit core switch(X-460-G2) one act as a Master and another one act as a Backup. Uplink from both core switches connected to an uplink port of Edge switch(Extreme 220 series) .so I need to configure an uplink port of an edge switch as an LACP(Shared port).
Userlevel 7
Niyas wrote:

Hi,
I have 2 Extreme summit core switch(X-460-G2) one act as a Master and another one act as a Backup. Uplink from both core switches connected to an uplink port of Edge switch(Extreme 220 series) .so I need to configure an uplink port of an edge switch as an LACP(Shared port).

The user manual includes the answer please read it.
Userlevel 2
Niyas wrote:

Hi,
I have 2 Extreme summit core switch(X-460-G2) one act as a Master and another one act as a Backup. Uplink from both core switches connected to an uplink port of Edge switch(Extreme 220 series) .so I need to configure an uplink port of an edge switch as an LACP(Shared port).

http://documentation.extremenetworks.com/200_hardware/index.html

http://documentation.extremenetworks.com/200_setup/index.html

http://documentation.extremenetworks.com/200_admin/

http://documentation.extremenetworks.com/200_commands/
Userlevel 1
Hi,

I have configured fiber uplink port 49 and 50 of extreme edge switch 220 and allowed all VLANs through this port. Do I need to configure LACP between this ports.how to configure LACP in extreme 220 edge switch?
Userlevel 7
Niyas wrote:

Hi,

I have configured fiber uplink port 49 and 50 of extreme edge switch 220 and allowed all VLANs through this port. Do I need to configure LACP between this ports.how to configure LACP in extreme 220 edge switch?

Check the post above it includes a link to the manual.
Userlevel 2
Niyas,

Please check if this article is useful -
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Dynamic-LAG-using-LACP-on...

Reply