I can't configure SNMP, tried all sorts of options, downloaded MIB, as a result, a complete zero. The switchboard does not provide any information. What could be the reason?
Community-String Community-Access View Name IP Address
-------------------- ---------------- ---------------- ----------------
public Read Only public 10.10.10.12
Community-String Group Name IP Address
-------------------- ------------------------------ ----------------
public public All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
---------------- ------- -------------------- ------- ------ -------- --- ------
10.10.10.12 Trap public 2 162
10.10.3.12 Inform public 2 162 15 3
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
---------------- ------- ------------------ -------- ------ -------- --- -------
Best answer by Vitaliy
Suddenly someone will need it, so that they don't suffer like me.
(Extreme 210) >en
(Extreme 210) #configure
(Extreme 210) (Config)#snmp-server group "public" v2 read "Default" write "Default"
(Extreme 210) (Config)#snmp-server community-group "public" "public"
(Extreme 210) (Config)#write memory confirm
