Header Only - DO NOT REMOVE - Extreme Networks

Trunk between Different Vendor device From Xtreme X440?


Userlevel 1
Tell me please, does Extreme X440-G2-24p-10GE4 switch support:

- VLAN Trunking Protocol?

Right now i am trying to make trunk between Extreme X440 switch to Ruckus Controller? Please do suggest me.

3 replies

Userlevel 4
Hello Alok,

VTP is a CISCO proprietary protocol and it is not supported by EXOS swicthes.
EXOS does support MVRP (Multiple VLAN Registration Protocol ) as a part of IEEE 802.1Q.
But most of all in your case trunk should be configured manually.

Best Regards,
Nikolay
Userlevel 1
Necheporenko, Nikolay wrote:

Hello Alok,

VTP is a CISCO proprietary protocol and it is not supported by EXOS swicthes.
EXOS does support MVRP (Multiple VLAN Registration Protocol ) as a part of IEEE 802.1Q.
But most of all in your case trunk should be configured manually.

Best Regards,
Nikolay

I am not creating VTP configuration , I am simply making a trunk between wireless controller and switch(Extreme)
Userlevel 6
Hi Alok

Take a look at this article.
https://gtacknowledge.extremenetworks.com/articles/How_To/Understanding-EXOS-VLANS-and-tagged-and-un...

You can add many VLAN's to a single port as tagged.

Reply