Solved

Device configuration not getting updated to aerohive AP230

  • 19 April 2021
  • 6 replies
  • 41 views

Device configuration not getting update properly need help ( Aerohives AP230)

 

 

icon

Best answer by Christoph S. 19 April 2021, 14:24

Hello,

 

Are you pushing a Delta or Complete update?

If failing on a Delta update push, on one of the APs try pushing a Complete update to see if this helps, bearing in mind that a Complete update will require a reboot. 

 

Thank you,

View original

This topic has been closed for comments

6 replies

Userlevel 6

Hello,

 

Are you pushing a Delta or Complete update?

If failing on a Delta update push, on one of the APs try pushing a Complete update to see if this helps, bearing in mind that a Complete update will require a reboot. 

 

Thank you,

It is delta update not a complete update.

Userlevel 6

Please try to push a Complete update to an AP with no connected wireless clients to see if it goes through. A reboot is automatically triggered upon update completion. 

 

Thank you

It is resolved after going for complete update.

 

 any reason why it was not getting updated properly in delta upgrade?

Userlevel 6

It depends on the type of change you are trying to push. 

 

Here’s an article that outlines when to push one type of update versus the other:

 

https://extremeportal.force.com/ExtrArticleDetail?an=000085494

 

I hope this helps,

Thank you Chris.Appreciated!!!