Concierge Desk
FAQs

Create topic
Login

ExtremeWireless (Aerohive)

A place for questions regarding wireless devices previously sold under Aerohive: AP30, AP130, AP122, AP230, AP250, AP330, AP410, AP460, AP 510, AP550, AP650

148 Topics
686 Replies

When you subscribe we will email you when there is a new topic in this category

148 Topics

Recently active

Most replies Most views Newest first

what is the meaning of ftpsk on show roaming cache?

how to clear the backup config?

I found there is backup config existed on a ap230, when the current config could not connect with capwap server, ap will reboot and revert to this backup config.how to:1. clear the backup config2. disable the revert action when failed to connect capwap server.

Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

hi, community.There are some problem within my wifi environment, I suspect the use are using bt or similar tool to download, occupied the whole Internet outbound.Do you suggest I implement rate limit per client qos policy?

A stake record of the device was found in the redirector.

I am seeing the above error when trying to add two AP130’s to my EXIQ.I purchased these 2nd user. I have asked the seller but they are not sure. Is there anyway to get these freed? TIA

some weird error on show log buffer

I occasionally `show log buffer` and saw some error:2021-07-23 11:20:38 info kernel: [wifi]: wl1: wlc_txbf_init_exp failed to set shm idx2021-07-23 11:20:38 info kernel: [wifi]: 1 wlc_txbf_set_shm_idx: fail to find a free user index2021-07-23 11:20:38 info kernel: [wifi]: wl1: wlc_txbf_init...

The 5G band steering doesn't works.

I have been read a lot of posts here and materials about how to encourage client to associated 5G radio, but failed.these are the config:additional settings - optional settings1. turnoff 2.4Ghz 1-24, set 36 to be basic2. turnoff 5Ghz 1-18, set 18 to be basicradio profile3. ng0_clone 2.4Ghz deny-...

how to assign diffent ssid to different specific devices?

I am going to create two ssid: aerohive-5G and aerohive-2.4G，assign 5G capable client to aerohive-5G, and 2.4G capable clients to aerohive 2.4G. but 2.4G coverage is just on a few limit area, so how to assign 2.4G and 5G ssid to some specific device concurrent, the others will hold 5G ssid only?

Strange DNS-Request via VLAN, not Management-VLAN

Hi there! Since we updated HiveOS to V10.3 there are some strange DNS-Queries log entries in the Firewall. We do not use Cloud-Services, we are working with APs on hivemanager Classic.The APs do not have connections to the Internet. The Problem: from V10.3 on there are strange DNS-Requests to www.go...

how to hardcode capwap server's config?

I just curiously, after I reset config(nomatter reset config under cli or press reset buttom and hold for 10 sec), but the conifg of capwap server still there, just like it hardcode within the ap. how to do that?here is the process---reset configshow runcapwap client server name hm-aus-119.aerohive....

how to speed up the roaming speed between two aerohive 230?

I deploy two aerohive ap230 on the same floor, here is the result of `show acsp neighor | inc aerohive` and `show acsp`---AH230(bigroom)#show acspInterface Channel select state Primary channel Channel width Power ctrl state Tx power(dbm) Use Last Selection--------- --------------------- -----...

System core dump

Hi, I’m just needing someone to re the log file from a system core dump as I cannot open it myself. Is someone able to assit?

AP130 continuously dropping clients | backhaul interface is loosing connection

Dear Extreme Community,I have currently twice the AP130's running. before they worked perfect. Since a week ago i am occurring strange problems: Clients are dropped regularly by the AP. device such as a Chromecast are then reconnecting to the other AP. about 5 a 10 seconds later the network comes b...

SSID in the "same" VLAN of MGMT APs

Hi team!!!I have a problem with SSID´s VLAN configuration and I would like some ideas to solved it.We have our switches configured with this VLAN mapping:- VLAN 99 UNTAG for management- VLAN 1 TAG for usersThe XIQ config has the default config, so the MGMT VLAN of the APs is the VLAN 1, but no probl...

NPS Server setup - attribute number of user profile

On page 5 of the following document to set up NPS server with areohive:https://docs.aerohive.com/330000/docs/guides/EAP-TLS_NPS_RADIUS_Server.pdfIt is asking for a “attribute number”. However extreme networks cloud does not have this settings on the user profile section. The user profile appears to...

Aerohive ap230 not running, not reset factory default button

currently i am having a case where my aerohive ap230 is not working and cannot be factory reset. It receives ip very slowly, sometimes receiving ip and sometimes not receiving ip. The orange light is always on.

Issues with deploying AP's

Hello,I am facing the following issue. A client of mine has 2 sites, both of which had a total of 7 aerohive (AP141) AP’s deployed. Recently we moved all the AP’s to one site and are now in the process of configuring the wifi settings. But here is where my problems begin, all the APs that were deplo...

Does aerohive ap could auto select the same channel with nearby to form mesh(backhual) link when the ethernet link down?

As the title, when I manually unplug one ap’s ethernet link, it didn’t choose the same channel as nearby, so the hive neighbor is blank, how to enable mesh automatically build function?

How to clone the existing wireless network policy

How to clone the existing wireless network policy. please share me the step

Dual 802.1X - MAC authentication on 1 SSID , possible ?

Hi,Environment: HiveManager 6.8 - AP121I'm currently using an SSID with 802.1x auth and certificate deployed by GPO to PC clients.All is working ok. Now I need to add Mac Authentication to the same SSID.Although I checked "Enable MAC Authentication" on the SSID config, I have a hard time finding th...

Where can I change the radio channel for my AP230 in XIQ Connect free version?

I added the AP230 into XIQ connect and created a new policy for it. But I looked everywhere still can’t find out where I can change the radio channel. Please help. Thanks a lot.

How I can manage my out-of-contract AP230?

I got my AP230 7years ago with 3 years of free contract. It was very stable and I haven’t changed the parameter like SSID, password, channel, etc since it was put in place. Now I have the requirement to change the SSID. Since I don’t have the active service contract, when I log into https://myhive.a...

Page 2 / 6

User Leaderboard

Tweets by ExtremeNetworks

Sign up

Already have an account? Login

Username *

E-mail address *

Real Name

(Private)

Only you and moderators can see this information

Company

(Private)

Only you and moderators can see this information

Role

(Private)

Only you and moderators can see this information

Password *

I accept the terms & conditions

loginBox.register.email_repeat

Login to the community

No account yet? Create an account

Username or Email

Password

Remember me

Forgot password?

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

Accept cookies Cookie settings

Cookie settings

We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.

Basic
Functional

Normal
Functional + analytics

Complete
Functional + analytics + social media + embedded videos

Accept cookies