Header Only - DO NOT REMOVE - Extreme Networks

10..11 - application visibility - supported on all APs ?


Userlevel 7
Is the feature working with all APs that are supported in v10.11 i.e. AP3705i ?

Thx,
Ron

6 replies

Userlevel 2
Hi Ronald,
This is only supported on the AP38xx and newer
Userlevel 7
Thanks Ryan
Userlevel 6
Hi Ronald. You can use Application Analytics with our wireless = you need NMS-ADV + EWC + AP37xx or 38xx or 39xx and probably also PV-FPM-xx If you want app analytics and enforcement then AP38xx and AP39xx + EWC... Regards Z.
Userlevel 7
Pala, Zdenek wrote:

Hi Ronald. You can use Application Analytics with our wireless = you need NMS-ADV + EWC + AP37xx or 38xx or 39xx and probably also PV-FPM-xx If you want app analytics and enforcement then AP38xx and AP39xx + EWC... Regards Z.

So in short I'd need a suitcase full of money 🙂

I've the full EMC/Analytics solution running in my lab but wasn't sure which restrictions there are in regards to the controller build in feature (might be a good idea to add this in the release notes).

For smaller customers it's a nice to have feature IF they have the APs to support it.

BR
-Ron
Userlevel 4
Pala, Zdenek wrote:

Hi Ronald. You can use Application Analytics with our wireless = you need NMS-ADV + EWC + AP37xx or 38xx or 39xx and probably also PV-FPM-xx If you want app analytics and enforcement then AP38xx and AP39xx + EWC... Regards Z.

Smaller customers can use ExtremeCloud with AP3805i-ROW/FCC or AP3935i/65i which support L7 visibility and control.

🙂
Userlevel 5
Pala, Zdenek wrote:

Hi Ronald. You can use Application Analytics with our wireless = you need NMS-ADV + EWC + AP37xx or 38xx or 39xx and probably also PV-FPM-xx If you want app analytics and enforcement then AP38xx and AP39xx + EWC... Regards Z.

https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-I-use-Application-Policy-rules-on-my-acce...

Reply