Header Only - DO NOT REMOVE - Extreme Networks

3912 in mesh bridge configuration


Is it supported to use the 3912 as a mesh AP to make a wireless bridge? Can you then assign VLANs (WLAN services) to the wired ports as usual?

3 replies

Userlevel 4
Hi James,

I believe this should help you.

http://documentation.extremenetworks.com/wireless/ug/wireless/user_guide/t_assigning_port_settings_a...

Regards,
Nathiya M
Nathiya Munuswamy wrote:

Hi James,

I believe this should help you.

http://documentation.extremenetworks.com/wireless/ug/wireless/user_guide/t_assigning_port_settings_a...

Regards,
Nathiya M

Hi Nathiya,

I have seen that, although I was thinking more about this screen: http://documentation.extremenetworks.com/wireless/UG/Wireless/User_Guide/t_configuring_the_mesh_iden...

Thanks
Userlevel 7
Hi James,

that should work but keep in mind that there are some restrictions....

i.e.
- Ports can be assigned individually but only to single WLAN service
- Each client port supports up to 8 clients

-Ron

Reply