Header Only - DO NOT REMOVE - Extreme Networks

3965i/e PSE Out (LAN2)


Userlevel 5
Hi Community

Has anyone played with the POE out port on the 3965 series AP's??
I do not seem to be getting any power out on the send port to power a normal 802.11af IP Camera.
I seem to recall a year or two ago that this feature was going to be made available in a future software release.
Has this been done??

5 replies

Userlevel 4
Hi Andre,

What version of firmware are you using and how much power is the AP able to draw?

As per the Installation guide:
Power consumption < 22W (Max.) when operating as AP only
< 55W (Max.) when operating as AP and providing power to a second device

Also is the LAN 2 port enabled?

Whats the power requirements of the camera?

- Sam
Userlevel 5
Hi Sam
We are running version 10.41.x.x (Latest Firmware)

The AP is the only connected device on a POE+ (HP/Aruba 2530)

How do you enable or disable the LAN port?
Userlevel 5
As I know , the PoE out (on the second port) it not yet supported on 3965 AP . Currently only 3912i AP support PoE daisy chain .
Userlevel 5
Ostrovsky, Yury wrote:

As I know , the PoE out (on the second port) it not yet supported on 3965 AP . Currently only 3912i AP support PoE daisy chain .

Yes it works fine on the 3912i, but not the 3965i/e
Can we confirm this as a fact??
Userlevel 7
Reference: https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-the-PSE-out-port-PoE-on-WS-AP3965i-support...

Reply