Access Point Grouping


Userlevel 1
I have 25 buildings in my school district and a total of 556 AP's throughout. They are a mixture of 2610;s, 3610's and 3805's. The 2610's are being controlled by a pair of 4210's running 8.11.09.004 firmware and the others are on 5210 controllers running 9.21.07.0007 firmware. I would like to group the AP's according to the building locations in order to do a Bandwidth by AP group report. Is this possible?

1 reply

Userlevel 6
Hi,

AFAIK you can do it with our management platform = NMS = NetSight = ControlCenter (just choose the name you wish to use).

You can start Console and then Wireless Manager. you need SNMP and CLI(SSH) access to the controller.

good luck

Zdenek

Reply