Header Only - DO NOT REMOVE - Extreme Networks
Question

AP2620 bridge ap


Userlevel 2
Bridge ap with ap2620-1 not work topology b@ap, user conect but can´t get ip. If configure static IP not ping no one. I have others legacy aps like 2605 and works fine

6 replies

Userlevel 4
Is the port of the L2 switch setup to forward data traffic to the correct VLAN?

Does the switch learn the MAC Addresses of the AP and of the Mobile Users (MUs)?

How many SSIDs are being advertised by the AP?
Userlevel 2
AG wrote:

Is the port of the L2 switch setup to forward data traffic to the correct VLAN?

Does the switch learn the MAC Addresses of the AP and of the Mobile Users (MUs)?

How many SSIDs are being advertised by the AP?

Have 2 ssids 1 b@ewc (works fine) and other b@ap (not works). If you reboot the ap 2610 the switch learn the mac but not works too. I have the same test on the same port with an ap2610 and ap2605, and ap3705. Only ap2610 not works, and i tested with others aps 2610(4) and not work too.
Userlevel 4
AG wrote:

Is the port of the L2 switch setup to forward data traffic to the correct VLAN?

Does the switch learn the MAC Addresses of the AP and of the Mobile Users (MUs)?

How many SSIDs are being advertised by the AP?

Thank you Luis. This will require an in depth investigation. I will open a service case for you. You will receive a case notification in your email shortly.
Userlevel 4
Hi Luis,

you don't write the FW Version but I would recommend to update to your ..using newest FW track.

Look to your filtering rules?!

Is radio 1 or 2 affected?

Regards

Umut Aydin
Userlevel 2
Umut Aydin wrote:

Hi Luis,

you don't write the FW Version but I would recommend to update to your ..using newest FW track.

Look to your filtering rules?!

Is radio 1 or 2 affected?

Regards

Umut Aydin

Hi

I have tested with version 9.21.16.0013(actual) and version 9.15.10.004. The problems occurs with 2 radios... And only on this model 2610.
Userlevel 4
Hi Luis,

please open a Case with GTAC we need gather the data's and need to reproduce this issue in the lab.

Regards

Umut Aydin

Reply