Header Only - DO NOT REMOVE - Extreme Networks

AP3805i screw thread measurements


Userlevel 2
Does anyone know the exact measurements of the screw thread on backside of AP3805i?

We want to use it for mounting purposes and figured out that this is not a metric screw thread.

We Need diameter and maximum length of screw.

Kind Regards

Marco

6 replies

Userlevel 7
Does that help ???

-Ron

Userlevel 2
Ron wrote:

Does that help ???

-Ron


Yes, this helps a lot. Seems for as if it is m2,5x12!

Have you measured the Diameter on the thread or on the shaft of the screw?

Do you have a mounting bracket at your site?

If yes I would appreciate to get a Picture of it 😉

I'm searching google for hours to find a picture without success!

Thanks a lot...

Marco
Userlevel 7
Here the link to the quick installation guide on the extranet....
https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=f920a676-3804-4e28-b2db-b4ec3...

drill template...
https://community.extremenetworks.com/extreme/topics/ap3805-drill-template

And a photo of the wall plate....



I think the measurement is from the shaft of the screw - not sure.

-Ron
Userlevel 6
Ron wrote:

Here the link to the quick installation guide on the extranet....
https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=f920a676-3804-4e28-b2db-b4ec3...

drill template...
https://community.extremenetworks.com/extreme/topics/ap3805-drill-template

And a photo of the wall plate....



I think the measurement is from the shaft of the screw - not sure.

-Ron

Very clever solution here Ron....brilliant really. Well played sir.
Userlevel 2
Ron wrote:

Here the link to the quick installation guide on the extranet....
https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=f920a676-3804-4e28-b2db-b4ec3...

drill template...
https://community.extremenetworks.com/extreme/topics/ap3805-drill-template

And a photo of the wall plate....



I think the measurement is from the shaft of the screw - not sure.

-Ron

Hi Ron,

thanks a lot for your help... you made my day.

David Bowie wrote his song "Hero" just for you 😉

Kind Regards

Marco
Userlevel 7
Ron wrote:

Here the link to the quick installation guide on the extranet....
https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=f920a676-3804-4e28-b2db-b4ec3...

drill template...
https://community.extremenetworks.com/extreme/topics/ap3805-drill-template

And a photo of the wall plate....



I think the measurement is from the shaft of the screw - not sure.

-Ron

Thanks a lot, glad I was able to help you out...

Kind regards,
Ron

Reply