Header Only - DO NOT REMOVE - Extreme Networks

C2G170 no start


Добрый день, помогите с проблемой, не загружается переключатель C2G170-24 В начале появится окно, проверку памяти и все перестает ((((кто может помочь ответить

Good day, help with the problem, do not load switch C2G170-24 at the start of the window appears, the memory check, and this all stops ((((Who can help answer

8 replies

Userlevel 4
Это данные из консоли? Покажите скриншот после проверки памяти

This is a data from console? Please provide a screenshot



And here in this position you twist and stay
Userlevel 4
I am sorry but I dont think there is much we can do here. If you get to the boot loader menu maybe the unit is recoverable. Below is a representation of what you should see.

Enterasys C2-Series Boot Code...
SDRAM Circuit Test of 511MB
100%

Version 02.01.51 06-08-2011

Computing MD5 Checksum of operational code...
Select an option. If no selection in 2 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):
Here's just this menu and no, switch does not boot further (((
As I was told that the problem is in this memory, and that we need a bios

Userlevel 4
Саня ARKONEN wrote:

As I was told that the problem is in this memory, and that we need a bios

Так ви таки жалуетесь или хвастаетесь? Самое простое -- заменить всю доп.плату целиком, но для этого нужен донор.
Userlevel 7
Саня ARKONEN wrote:

As I was told that the problem is in this memory, and that we need a bios

Please stick to English, Nick... Google Translate does fine.
Userlevel 4
Саня ARKONEN wrote:

As I was told that the problem is in this memory, and that we need a bios

This is what google translate did to above.

So do you complain or brag about it? The simplest thing is to replace the whole additional payment, but for this you need a donor.
Maybe someone has copied the BIOS from such a switch, I think for such help you can pay

Reply