Header Only - DO NOT REMOVE - Extreme Networks

Check the performance of an AP depending on the power it recieves

Userlevel 1
Hi Guys

Is there a way to see what performance the AP gives depending on the power it receives.
I know the 3935 will transmit on 2x2 when it only gets 15w power and 4x4 on 25w.
But is there a place to confirm it is broadcasting at that either via the Gui on the controller or the CLI of the AP.


2 replies

Userlevel 4
Hi Cornel,

From the home screen on the GUI you are able to view AP's that are in low power mode in the health table.

Hope this helps.

Best regards,
Userlevel 1
Hi Sam

Thanks for that.

I completely forgot about that......
Been a long 2 weeks.