Daisy chain another network device off the LAN2 port of a AP3825i?


We have a case where we have an network connected projector very close to out AP's. Can I provide connectivity by daisy chaining it to the LAN2 port of a AP3825i. Perfect world would be to have it on its own VLAN.

6 replies

Userlevel 7
Not at this time, the system is not setup to work like that.
Userlevel 6
Hello

This isn't possible, this article explains how the 2 ports on the AP work: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the... -Gareth
Userlevel 7
Gareth Mitchell wrote:

Hello

This isn't possible, this article explains how the 2 ports on the AP work: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the... -Gareth

Try this link... https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the...
I appreciate all feedback. I had seen the document on the "Default Operational..." The terminology does make one wonder if there are any other operational modes. Are there? If so what are they and how are they implemented?
Userlevel 7
Nothing at this time, we could re-word that article to make sure it's clear.
Userlevel 6
Hello

I've modified the article a little to hopefully clear things up, as for your original question, this is not possible.

-Gareth

Reply