Direct SNMP monitoring of Access points (3805i) possible?

Userlevel 1

We use Zabbix as our central monitoring system.
Currently we are monitoring our access points by contacting the controller with SNMP. This works fine.

But I am interested if it is possible to access the access points directly through SNMP?

Kind regards,


3 replies

Userlevel 6
Hi Frank

The AP's don't support direct SNMP access.

Userlevel 1
Hi Gareth

Thanks for the info.

Userlevel 6
you can monitor the AP through the controller (via SNMP). Each AP interface (wired, radio, ssid) is presented as interface on the controller. If the radio goes down then port on controller goes down. if you disable ssid then port on controller goes down.