Header Only - DO NOT REMOVE - Extreme Networks

How can I turn seamless roaming on V2110?


Userlevel 4
Hello, everybody!

I have one V2110 controller (v10) and 10 APs. I need seamless roaming (mobility) for clients. How can I turned it on? The APs are 3805i, auth type is WPA-PSK.

Many thanks in advance,

Ilya

4 replies

Userlevel 4
Ilya,

roaming is seamless so you don't need enable special for this.

Regards

Umut
Userlevel 4
If you have more pair ( but you have only one controller so it's not needed)
then you need enable mobilty .

This can be done in the menu
Controller->Services->Mobility Manager
Userlevel 6
For PSK you need to design right coverage. The client should have a AP to what can roam. If there are too many APs it is bad. If there is no AP to roam it is bad.
Userlevel 4
Thanks, gentlemen!

Reply