how to configure default route in controller C25


[i]

3 replies

Userlevel 7
From the controller GUI > Controller > Network > Routing Protocols > new

For a default route set "Destination Address" and "Subnet Mask" to 0.0.0.0 and put 172.129.20.1 in the "Gateway" field.

-Ron
Userlevel 6
Differrent way to do it for admin topology and differrent for physical topology. ip Route add 0.0.0.0 0.0.0.0 1.1.1.1 Apply The above should be for physical. The admin should be through; Topology Admin L3 ... Apply End Apply End ...
Userlevel 7
Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-the-default-route-on-the-...

Reply