Extreme Networks Homepage Extreme Networks Homepage

IdentiFi: 2.4Ghz cllients unable to get IP

Show first post

31 replies

I
Userlevel 2
Hi James, did you try with 10.41.12?
James A
Userlevel 6
I have not, I see "wns0021104 Corrected 2.4GHz rate selection on AP38xx for single 1x1 clients." in the release notes which is interesting, although the symptom I see is the AP can't hear the client, not the other way around. I'll see if I can find some time to give it a try tomorrow.
I
Userlevel 2
Thanks, working in the Public sector does not afford much time/environment for testing.
James A
Userlevel 6
I tested 10.41.12 and it doesn't fix it. One thing I noticed with a RealCapture from an affected is that it doesn't see any probe requests at all from any client. You can see this yourself by applying the filter "wlan.fc.subtype==4&& wlan.fc.type==0 && !(wlan.ssid == "MyDomain")" in Wireshark.
I
Userlevel 2
Doesn't look like 10.41.13 has a fix either. Think I'll raise a call with GTAC
James A
Userlevel 6
01729857 is my case number if you want to have GTAC compare.

Reply

    Back to top