In-Service RADAR capacity question

If a customer is deploying a 100AP wireless installation and wants in-service RADAR enabled do you enable RADAR on all APs or is there a general formula that might be used such as 1 in-service radar AP per 5 or 10, etc.? Just thinking about licensing requirements.

1 reply

Userlevel 7
On all of them.

APs in an "in-service" scan group will only scan on the channel that the AP is operating on.
I.e. AP#1 is providing WLAN services on channel#6 - that is also the only channel RADAR is done on.

So you want as many as possible to cover more channels in an area.