Show used topology in EWC client report?


Userlevel 3
  • New Member
  • 65 replies
Hi,
how can I see at EWC Client Report which topology (group) /VLAN a wireless client uses?

I currently use EWC 10.21.01.0065 and client report shows only EWCs role for this client. In our installation the used VLAN is decided by NACs policy mapping table with policy roles and VLAN IDs.

12 replies

Userlevel 4
Hi,

you can only see the PVID .
That's the topolgy that the user had and this is tied to the certain VLAN.

There is no VLAN # data available only this binding.

Regards
Umut Aydin
Userlevel 3
Hi,
i dont see a PVID in client report (please see attached picture). Is there an option which I have to set up?

Userlevel 4
Hi,

sorry for the confusion..they removed PVID it in the 10.21.

I made a quick search in my lab and they was on 10.11 and 9.21.
And here you can always see the PVID but in the 10.21 not.

I will check if this is volitional in that version ?!

But in any case you don't have the VLAN info directly.

If so you have like you said only the Role and with that the binding to the Topology = VLAN.

Regards

Umut Aydin
Userlevel 3
Hi,
to see the topology (group) or PVID would be enough.

To see only role is not enough since with NAC policy mapping, users with same role can land in different topology groups.
Userlevel 4
Hi,

all what we can do is to create a Feature Request for this.

Could you pease open a case with GTAC and ask for a C4 Feature Request.

Thanks

Regards

Umut Aydin
Userlevel 3
Feature request created.
Thank you
Userlevel 4
Can you please post the case # so we can follow this as well.

Thanks

🙂
Userlevel 7
Umut Aydin wrote:

Can you please post the case # so we can follow this as well.

Thanks

🙂

Would be great if Extreme could also take the suggestion from the following post into acount to improve the current view.....

https://community.extremenetworks.com/extreme/topics/extremewireless-v10-21-reports-gone-new-reports

-Ron
Userlevel 3
Hi,
Case is #01297914
Userlevel 3
Hmm, I can't see this case number in my case archive. Is this common for feature request cases?
Userlevel 3
htw wrote:

Hmm, I can't see this case number in my case archive. Is this common for feature request cases?

Yes, Feature Request are not visible in your case archive. You can use the FR number for communication.
Userlevel 7
htw wrote:

Hmm, I can't see this case number in my case archive. Is this common for feature request cases?

A case that I can't track in the case portal - welcome to 2017.

Reply