Header Only - DO NOT REMOVE - Extreme Networks

WDS between AP3825 , we never seem to get the tunnel up . live so changes are limited


Userlevel 3
Trying to create a WDS between AP3825 , we never seem to get the tunnel up . any advise , this is a live network so reluctant to make too many changes

2 replies

Userlevel 4
Hi Rod,

Please check whether this KB helps,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-a-WDS-Wireless-Bridge

Regards,
Nathiya M
Userlevel 6
Rod

Further to Nathiya's advice, the most important note is that the AP's will not bring the link up if they detect a loop, once you configure the AP's move the child AP to a standalone switch to be 100% sure there is no loop.

-Gareth

Reply