Wifi controller Enterasys identifi C4110-2 - Numbers of clients per access point with SNMP


Hi all,

sorry for my English.

I'm having trouble picking up the users connected by access point via SNMP.

Anyone know which OID is responsible for this task in the MIB?

Thank you all

6 replies

Userlevel 6
Hi Carlos

Take a look in the muEntry table @ 1.3.6.1.4.1.4329.15.3.6.2.1



Is this what you are looking for?

-Gareth
Hi Gareth,

This OID did not bring the information I want.

I have an example of what I want in the FortiGate controller, for example:

#snmpwalk -v2c -c comunity IP_controller 1.3.6.1.4.1.12356.101.14.4.3.1.3

SNMPv2-SMI::enterprises.12356.101.14.4.3.1.3.1.16.70.65.80.50.49.66.51.85.49.48.48.48.55.56.56.53 = STRING: "AP1"

SNMPv2-SMI::enterprises.12356.101.14.4.3.1.3.1.16.70.80.50.50.49.66.51.88.49.50.48.48.50.55.57.54 = STRING: "AP2"

#snmpwalk -v2c -c comunity IP_controller 1.3.6.1.4.1.12356.101.14.4.4.1.17

SNMPv2-SMI::enterprises.12356.101.14.4.4.1.17.1.16.70.65.80.50.49.66.51.85.49.48.48.48.55.56.56.53 = Gauge32: 3

SNMPv2-SMI::enterprises.12356.101.14.4.4.1.17.1.16.70.80.50.50.49.66.51.88.49.50.48.48.50.55.57.54 = Gauge32: 0

In the example of FortiGate controller, I have the access point named "AP1" with 3 authenticated users and an access point named "AP2" with 0 authenticated users.

I need this information referring to the number of authenticated users in each access point for the controller enterasys.

Tranks
Userlevel 6
Carlos

The user count is here:

root@kubuntu-1:/var/log# snmpwalk -v3 -u identifi -a SHA -A extreme123456789 -l authpriv -x AES -X extreme123456789 aaa.bbb.ccc.ddd 1.3.6.1.4.1.4329.15.3.5.2.2.1.14

iso.3.6.1.4.1.4329.15.3.5.2.2.1.14.3 = Gauge32: 2
iso.3.6.1.4.1.4329.15.3.5.2.2.1.14.4 = Gauge32: 1

The AP name is here:

root@kubuntu-1:/var/log# snmpwalk -v3 -u identifi -a SHA -A extreme123456789 -l authpriv -x AES -X extreme123456789 aaa.bbb.cccc 1.3.6.1.4.1.4329.15.3.6.2.1.12

iso.3.6.1.4.1.4329.15.3.6.2.1.12.6.0.34.176.109.77.255 = STRING: "AP3805i-test"
iso.3.6.1.4.1.4329.15.3.6.2.1.12.6.64.176.250.100.72.94 = STRING: "AP3825i-test"
iso.3.6.1.4.1.4329.15.3.6.2.1.12.6.252.194.222.201.188.174 = STRING: "AP3825i-test"

AP name is also here (all AP's not just active but cut to the ones shown above:)

root@kubuntu-1:/var/log# snmpwalk -v3 -u identifi -a SHA -A extreme123456789 -l authpriv -x AES -X extreme123456789 aaa.bbb.ccc.ddd 1.3.6.1.4.1.4329.15.3.5.1.2.1.2
iso.3.6.1.4.1.4329.15.3.5.1.2.1.2.3 = STRING: "AP3825i-test"
iso.3.6.1.4.1.4329.15.3.5.1.2.1.2.4 = STRING: "AP3805i-test"

2 users were on AP3825, one on the 3805.

Hope this helps

-Gareth
Gareth,

Thanks for all.

It worked perfectly.

🙂
Userlevel 6
Thanks for the feedback Carlos.

I wrote this article that covers our discussion: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-MIBs-can-I-poll-to-find-the-number-of-us...

Best regards

-Gareth
Userlevel 6
Gareth Mitchell wrote:

Thanks for the feedback Carlos.

I wrote this article that covers our discussion: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-MIBs-can-I-poll-to-find-the-number-of-us...

Best regards

-Gareth

Mighty fine work here Gareth. Well done!

Reply