Header Only - DO NOT REMOVE - Extreme Networks

Wireless planner tool issue


Userlevel 6
Hello, all!

Upload image.
1. Draw boundary.
Trying Set scale and receive error - Floor size is out of bounds.
2. Set scale.
Trying to draw Boundary and receive error - Boundary size is out of bounds.

Any ideas?

Thank you!

7 replies

Userlevel 6
Hi Alexandr

How large is the area in square metres you are using as your plan?

-Gareth
Userlevel 6
Hello, Gareth!

96x177 meters.

Thank you!
Userlevel 6
Alexandr P wrote:

Hello, Gareth!

96x177 meters.

Thank you!

Thanks - I'm checking into that and will let get back to you as soon as possible.
Userlevel 6
Alexandr P wrote:

Hello, Gareth!

96x177 meters.

Thank you!

Hi Alexandr

The current limit is 10000 square metres, can you subdivide the area somehow?

-Gareth
Userlevel 6
Alexandr P wrote:

Hello, Gareth!

96x177 meters.

Thank you!

Thank you for information!

I'll try.
hi
how to load image on planner
Userlevel 7
DINESH KUMAR wrote:

hi
how to load image on planner

Take a look in the below image....

On the right side you'd see my location tree with Country Austria, location Vienna
and per location you'd create floors (EG in my example).

Then on the floor level in the lower left corner you've th elink for image upload.

Reply