Concierge Desk
FAQs

Create topic
Login

ExtremeWireless (IdentiFi)

A place for questions and discussions regarding IdentiFi wireless products: AP3935, AP3965, AP3825, AP3805, AP3865, AP3705, AP3715

1,129 Topics
6,109 Replies

When you subscribe we will email you when there is a new topic in this category

1129 Topics

Recently active

Most replies Most views Newest first

service and warranty

Warranty and service policy of Ap 3935 row

Arp Poisoning/spoofing Wireless Identifi

Hello!Is there any configuration available on Identifi controller to prevent arp Poisoning/spoofing?

Problems with Realtek wireless adapters, 10.41.12.0006, AP3705i

C35 Controller running 10.41.12.0006 AP AP3705i Client: Lenovo A485, Windows 10Pro - Realtek 8822BE chipset We have issues with some clients that have Realtek chipsets when they are on 5ghz and associated with the 3705 AP. They experience extremely high latency: ping times to the nearest switch on...

Extreme Wireless Controller Firmware Update

Good Afternoon,I was wondering why there has not been a new release of Extreme Wireless Controller firmware (currently at 10.51.17.006) since November 2020?What is the release date for the next revision? Thank you,Chris

Unable to use Airprint Bridged@EWC

We have all of our iPads on the same vlan tunneled back to the controller. We are unable to get airprint to work. Considering these are all on the same subnet it seems rather straight forward. Is there something in the bridge@ewc that would prevent bonjour? We have no policy rules configured for the...

the commands for the cli are not recognized by the AP505i

I have connected my ap505i through PoE, I have a communication by SSH but when using the commands it tells me that these commands were not found, the AP uses a WING 7.1.0 I have tried to update it by FTP but the update command does not recognize me .What you want to achieve is to configure the equip...

NAC / XMC as Radius - not passing 802.1x authentication

Hi Team,I have Extreme Management Center (XMC), Extreme NAC and Extreme Wireless (V2110) configured in my environment. XMC is acting as a Radius and it is successfully authenticating users. My issue is with configuring 802.1x (PEAP) authentication on an SSID. I configure 802.1x and set the Radius...

Extreme Wireless captive portal against Cisco ISE

Hi Team, i try to configure a guest ssid with CWA against Cisco ISE. So we configured our C35 Controller with a FW friendly guest ssid. And add ISE as MAC, Auth and Accounting Radius Server. We add the redirect URL we got from ISE und check the box to append the “stations mac” to the URL. On ISE...

site survey with IdentiFi access point, battery pack, with and without LAN

I need to do an AP on a stick survey in a location where there is no LAN. I need to use a 3935 for my APOS survey. How can I do that?I have prepared a WS-AP3935i for site survey using this directions:https://extremeportal.force.com/ExtrArticleDetail?an=000074210&q=identifi%20survey%20apI have an...

How to access AP3935i-fcc

Hi,I have the AP3935i-fcc but I don't have anything to help me having access and configure that for internal using without cloud analytics, just like autonomous mode.What should I do?Thanks in advanced

C5210 EoL

HiCould I know the Endo of live and end of support date for Extreme C5210 Wireless Controller?Thanks in advance

C5210 Roaming Question

Hi All,I’m looking for some advice on “roaming”, specifically how I determine whether the controller or the client made the decision. I have a particular client that was connected for over an hour to a specific access point and then “roamed” to another access point within the vicinity of that office...

C35 controller and zoom issues

We have a c35 controller with ap3935i and ap3965i access points. We can run zoom no issue when hardwired and already check for any firewall issues that could be affecting. But when on wireless it will randomly crash and lockup. Could happen 10 minutes into a meeting or 30 minutes in and when that...

Wi-Fi - Azure AD (AAD) Authentication + Per-vlan assigment

Hi,I would like to ask if anyone knows if its possible to use only Extreme hardware/software to do a Wi-Fi deployment were a single SSID will be using Azure AD for user authentication and also have the possibility to map a specific user/group to a specfic vlan/group policyCurrently I’m using Cisco...

XCA Floorplan poor image quality

Hi, when we’re uploading good quality images into XCA / XCC as floorplan images, the Image quality in XCA is very poor. It seems that the rendering is not working well and it feels like the displayed images in a thubnail. Issue is seen in multiple installations. We tried a detour via Ekahau, but...

802.1x Certificate Auth vs. AD Computer Auth from a security standpoint?

I am upgrading wireless for a site where one SSID is configured to allow AD joined computers to connect automatically using certificate based 802.1x authentication. This has been working great and they are happy with the setup, so I am not dead set on changing it… however it is a little more complex...

Extreme Network Identifi WiFi

Good Morning, Just looking to see if there is any recommended release details for Extreme Identifi like its done for XOS and EOS for different model switches. We’ve also procured 3915i APs, soon to take delivery, need to find out if there is a minimum version for this model, datasheet doesnt specify...

IdentiFi external Captive Portal Redirection by using more than one NAC Engine

Hello community,I successfully implemented an external Captive Portal on NAC with using IdentiFI Controller. Since the customer is using two NAC engines for redundancy I wondered what is the best practice doing the redirection to the captive portal while running more than one NAC engine. In the conf...

CLI commands for XCC

Hi guys, Does anyone knows if there is a CLI guide for the XCC?I do have one for the Identify controller but it doesn’t seems to take the commands.ThanksMig

Ap3915i change default password & web access

I have about 40 AP3915i APs up and running (contractor done this for us) and I want to change the default AP password. How can I do this, is it via XMC or the controller?My second question is, can I access the Aps directly using a web browser or is it only SSH? This is useful for troubleshooting ind...

How to guide: Extreme Wireless authenticates domain computers using certificates (NPS/EAP-TLS)

This is a quick "how to" for setting up your Windows domain laptops, tablets, etc. for authentication to an Extreme Networks WLAN service. The goal is to have an SSID that can be joined without the use of any password, or additional steps by the user. They will click on the SSID and go! For the conn...

c25 controller

Hi Team,We have C25 controller having version 10.31With 50 AP license. We have configuration backup of another C25 controller having version 9.12 with 16 AP License. Please let us know can we load this backup in controller of version 10.31. Also we are getting license violation error in 10.31 contro...

AP3935i 10.41.18.0001 low throughput until reboot

Hi, I’ve been trying to troubleshoot some deployment (C5210s + 3935i) and low throughput being experienced at times. We have managed to get it quite well (e.g. 100 megs with single STA connected on 20 MHz channel, 2x2 11ac, iperf on local network) but there was number of APs (maybe 1% of them) where...

RFS 4000 v7.3.0.2-011R

My customer has RFS 4000 with some AP 7522 and 7562 with 5.9.6 Sw version.Lately they have some issue with Windows 10 PC and Android dices roaming and I would like to update the RFS and AP softwareI see new version 7.3.02 or 5.9.6. Which one I should to use?

AP offline after extended power outage

We had a power failure, that drained our APC units. Once the power came back we had multiple APs not come on. No lights no nothing. I've unplugged and replugged at the switch, still nothing. The only solution has been unplug and replug at the Access Point. Thoughts?

1
2
3
4
...
46

Page 1 / 46

User Leaderboard

Tweets by ExtremeNetworks

Powered by inSided

Sign up

Already have an account? Login

Login with your Extreme Portal account

or

Username *

E-mail address *

Real Name

(Private)

Only you and moderators can see this information

Company

(Private)

Only you and moderators can see this information

Role

(Private)

Only you and moderators can see this information

Password *

I accept the terms & conditions

loginBox.register.email_repeat

Login to the community

No account yet? Create an account

Login with your Extreme Portal account

or

Username

Password

Remember me

Forgot password?

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

OK

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

OK