Header Only - DO NOT REMOVE - Extreme Networks

2018-01-22: New GTAC Knowledge Articles January 07 - 20, 2018

Here are the new articles that were published January 07 - January 20, 2018 in GTAC Knowledge:

Sunday, January 07, 2018:

Monday, January 08, 2018:
Are AirDefense ADSP Appliances affected by the Meltdown and Spectre vulnerabilities
ExtremeCloud - Access Point Event Logs not populating information
ADSP - SLOW UI - user interface
Dot1x Authentication does not work when enabled on the same port with MAC Authentication
Amazon (AWS) signature expires on IdentiFi firewall friendly captive portal

Tuesday, January 09, 2018:
Extreme Wireless WiNG - What should I collect before I open a case with GTAC?
How To Configure an ACL on the 200-Series to Allow One subnet
Apple iPhones and iPads running IOS 11.2.5 Beta experience Wifi drops and performance issues.
What does UV/OV mean
Can an Exos switch name contain numbers
After Update to Firmware version some AP's show as inactive
What does the RSS Current & Average mean in the AP Performance Report By Radio?

Wednesday, January 10, 2018:
Can Port Buffers (Memory)be Configured or Viewed on an S-Series?
Why is Webview not working in firmware 8.62 and higher?
iPhone will not connect to ExtremeCloud SSID when they come out of sleep mode
What is the difference between FT over the Air and FT over the DS under WiNG5?
XOS nodealias does not assist in resolving IP resolution or IP address with Access Control (NAC)
SNMPWALK returns values for only few VPLS indexes after making configuration changes in VPLS.
RADIUS shared secret has changed after EXOS upgrade followed by save and reboot.
Core0: Cache error exception

Thursday, January 11, 2018:
When and on which hardware/software version will ExtremeWireless support WPA3
How to Configure a Port Description String
How many ExtremeWireless Access Points can I have on a wireless controller appliance?
Remote Shell not available for all AP - although all working with 10.41.02

Friday, January 12, 2018:
Where can I find an SFP/SFP+/QSFP/QSFP28 Compatibility Guide for EXOS based switches?
Logged into the Extreme Portal, but cannot see firmware
Unable to configure switching-mode cut-through in Summit X620
Why I cannot change VLAN 2200 in WiNG Express?
Can we install the VX9000 in Azure?

Saturday, January 13, 2018:

Sunday, January 14, 2018:

Monday, January 15, 2018:
Integrating ExtremeWireless with HPE ClearPass web portal for user authentication

Tuesday, January 16, 2018:
TS-524 Getting Current Overload message when second telephone plugged into unit
Unable to Access the Extreme Wireless WiNG AP-75xx via GUI Interface
What is default security configuration used on WiNG system?

Wednesday, January 17, 2018:
ADSP 9.5 cannot manually add wireless client unless classifying as neighbor
RFS UI not accessible after upgrade to v5.2.13
WiNG Unable to see hourly client count on specific time/date range
Why I cannot install VMtools to virtualized ADSP?
How does the out-action "set-drop-precedence" work when configuring meters?
When configuring meters, out-action "set-drop-precedence" does not work as expected.

Thursday, January 18, 2018:
VN 2018-003 - ExtremeWireless WiNG Vulnerabilities
AP39xx will not power up on an Aruba/HPE 2530-48G-PoEP
NTP on ExtremeWireless controller doesn't sync using DNS hostname instead of IP address
Why I'm getting an ' invalid license' error every time 'commit' or 'commit and save' is selected?
What is the best practice to SNMP poll WiNG devices?
Reset on scheduled firmware upgrades not working
What is Depp Packet inspection (DPI)?

Friday, January 19, 2018:
WiNG Express - Cant configure static IP at device level - option to save in GUI is grayed out
VLAN Bounces on S-Series
ExtremeCloud - Smart RF is not tuning the channel and power correctly
WiNG device showing "% Error: get_config_atomic() - unknown exception - AttributeError("'Device_Cfg' object has no attribute 'longitude_coordinate'",)"

Saturday, January 20, 2018:

0 replies

Be the first to reply!