802.1x AP4000 with NPS

I'm trying to set a SSID with 802.1x. I'm using AP4532 version This is the wlan config:


aaa-policy TEST

authentication server 1 host secret 0 PASSWORD

authentication server 1 proxy-mode through-controller

authentication protocol mschapv2


wlan wlan3

ssid TESTE

vlan 3010

bridging-mode local

encryption-type ccmp

authentication-type eap

use aaa-policy TEST

This is the NPS on Windows Server 2012 config:

Network Policies > Authentication Method > EAP-MSCHAP v2

Settings > RADIUS Attributes > No Standard or Vendor Specific

I'm getting the following error code:




The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

2 replies

Userlevel 7

Have you been able to figure this one out? Usually this message on the server means the client is not matching the same authentication method configured on the server. Example would be the Client is trying smart card/certificate when NPS is configured for PEAP.
Hi guys,

Wanna share my experience. Managed to do following this guide: https://www.youtube.com/watch?v=-Vy4uzb2Wmg