I have a user who needs to see if there are any faults on the access point radios over SNMPv3. I have looked through the MIB OIDs, but I cannot find any sort of fault status provided for the radios of the access point. The only thing I can find is the following:
18.104.22.168.4.1.322.214.171.124.126.96.36.199.1.2 - wingStatsDevWlApInfoFaultDetected
188.8.131.52.4.1.3184.108.40.206.220.127.116.11.1.9 - wingStatsDevWlRadioState
These are simple ON/OFF or 1/2 status values. They are not going to specify any short of fault on the radio. Is there another OID that does state any sort of radio fault code?
This was done on an AP7532, running WING 5.8.3 firmware.