Header Only - DO NOT REMOVE - Extreme Networks

altitude 4600 access point, access to console

I have an ap4600 that has isolated itself from the wm3600 controller, how can I access it via console to check what is happening.

1 reply

Userlevel 3
As you have probably noticed, there is no console port on the unit.
If you can determine the IP address, your best bet would be to try to connect to it directly via SSH.

There is a tool to remotely reset the AP, but you need the serial number and the procedure must be completed within 10 minutes of a reset.
This tool is for WiNG APs, and the 4600 was an OEM AP650 at the time, but I don't know if it will work or not.
See: https://extremeportal.force.com/ExtrArticleDetail?n=000018658

See also this article: https://extremeportal.force.com/ExtrArticleDetail?n=000013557&q=ap650%20console