Header Only - DO NOT REMOVE - Extreme Networks

AP wing 7522 adapt to rfs 7000 controller


Userlevel 1
I have AP wing 7522 and I don't know how to adapt it to rfs 7000 controller.
Please help me. Thank you

5 replies

Userlevel 4
For a basic setup very easy. Connect all APs and RFS within the same VLAN. That's it.

You can extend this with Adoption Policy to create intelligent Zero Touch Deployment.
Userlevel 1
Timo wrote:

For a basic setup very easy. Connect all APs and RFS within the same VLAN. That's it.

You can extend this with Adoption Policy to create intelligent Zero Touch Deployment.

Thanks sir, I will try to cinfigure them within the same vlan.
Do you have any example there sir for me to follow,like step by step config.thanks
Userlevel 4
Timo wrote:

For a basic setup very easy. Connect all APs and RFS within the same VLAN. That's it.

You can extend this with Adoption Policy to create intelligent Zero Touch Deployment.

WiNG have so much options you can do.

You can find some "How To" under WiNG Software:
http://www.extremenetworks.com/support/documentation/
Userlevel 3
You may also want to verify that your RFS 7000 controller is running at minimum a version of firmware that supports the AP 7522.
Userlevel 1
Andrew Webster wrote:

You may also want to verify that your RFS 7000 controller is running at minimum a version of firmware that supports the AP 7522.

Yes exactly.

Reply