Question

AP7632 can't adopt on specific Remote Site


Userlevel 2
Hello,

We have swapping AP650 to AP7632 on remote sites, but in one specific site, our ap7632 have problems on provisioning profile. Can adopt on VX9000 but have "config error"

# show adop status

AP-SHOP...A-FUNDO 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:04 4 days 01:00:37
AP-CIDA...NQUEDOS 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:43:58 9 days 06:08:12
AP-CIDA...X-FUNDO 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:04 8 days 03:25:53
AP-CIDA...-FRENTE 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:43:42 8 days 03:25:49
ap7632-0D9A05 5.9.1.5-001R error Yes VX9000-BEMOL 0 days 00:32:14 0 days 00:35:09
ap7632-0D9A5A 5.9.1.5-001R error Yes VX9000-BEMOL 0 days 00:33:33 0 days 00:35:18
ap7632-0D9A7D 5.9.1.5-001R error Yes VX9000-BEMOL 0 days 00:40:07 0 days 00:42:07
ap7632-0D9A87 5.9.1.5-001R error Yes VX9000-BEMOL 0 days 00:40:01 0 days 00:42:12
AP-BVA-16 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:05 34 days 00:16:56
AP-BVA-07 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:08 34 days 00:16:56
AP-GRAN...-ESCADA 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:02 172 days 12:14:40
AP-BVA-06 5.9.1.5-001R configured No VX9000-BEMOL 0 days 06:44:04 34 days 00:16:47
... more APs

# VX9000-BEMOL*#show adoption log adoptee on ap7632-0D9A87

2019-01-28 18:49:26:Received OK from cfgd, adoption complete to 12.3C.EA.66
2019-01-28 18:49:26:Waiting for cfgd OK, adopter should be 12.3C.EA.66
2019-01-28 18:49:26:Adoption state change: 'Connecting to adopter' to 'Waiting for Adoption OK'
2019-01-28 18:49:26:Adoption state change: 'No adopters found' to 'Connecting to adopter'
2019-01-28 18:49:26:Try to adopt to 12.3C.EA.66 (cluster master 12.3C.EA.66 in adopters)
2019-01-28 18:49:00:Got new value for MTU: 1500 Was: 0
2019-01-28 18:49:00:Sending MLCP_REQUEST to 10.74.1.1:0
2019-01-28 18:48:55:Received MLCP offer from 10.74.1.1:24576 preferred=0 capacity = 25544 (force:0, level 2)
2019-01-28 18:48:55:Sending MLCP_DISCOVER to IP 10.74.1.1, UDP port 0
2019-01-28 18:48:55:Start MLCP IP Discover
2019-01-28 18:48:55:Clearing already existing ipsec secure config for MLCP group 0 candidate 10.74.1.1
2019-01-28 18:48:55:DNS resolution completed, starting MLCP
2019-01-28 18:48:55:Received 1 hostnames through DHCP option 191
2019-01-28 18:48:21:Received 0 hostnames through DHCP option 191
2019-01-28 18:48:21:Adoption state change: 'Disabled' to 'No adopters found'
2019-01-28 18:48:21:DNS resolution completed, starting MLCP
2019-01-28 18:48:21:Adoption enabled due to configuration

Capturing up to 50 packets. Use Ctrl-C to abort.
1 19:21:25.363434 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data length 116, DSCP 0| DGRAM 12.3C.EA.66/0 > 00.00.00.00/12 router HELO from 12.3C.EA.66
2 19:21:29.526125 MINT 94-9B-2C-0D-9A-87 > 01-A0-F8-00-00-00 | DGRAM 2C.0D.9A.87/34 > 00.00.00.00/34 mlcp, discover
3 19:21:29.860055 MINT 94-9B-2C-0D-9A-5A > 01-A0-F8-00-00-00 | DGRAM 2C.0D.9A.5A/34 > 00.00.00.00/34 mlcp, discover
4 19:21:34.086147 MINT 94-9B-2C-0D-9A-05 > 01-A0-F8-00-00-00 | DGRAM 2C.0D.9A.
5 19:21:34.489097 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data length
6 19:21:38.183329 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data length
7 19:21:38.392980 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data length
8 19:21:40.365354 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data length
9 19:21:42.266207 MINT 94-9B-2C-0D-97-03 > 01-A0-F8-00-00-00 | DGRAM 2C.0D.97.
10 19:21:46.809662 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data lengt
11 19:21:49.743254 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data lengt
12 19:21:52.604819 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data lengt
13 19:21:55.515495 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data lengt
14 19:22:04.874410 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data lengt
15 19:22:08.198260 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data lengt
16 19:22:08.403677 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data lengt
17 19:22:10.665609 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data lengt
18 19:22:19.976824 UDP: 10.74.52.51 > 10.74.1.1 ports 24576 > 24576, data lengt
19 19:22:25.693517 UDP: 10.74.1.1 > 10.74.52.51 ports 24576 > 24576, data length 116, DSCP 0| DGRAM 12.3C.EA.66/0 > 00.00.00.00/12 router HELO from 12.3C.EA.66

# ap7632-0D9A87#show adoption status
Adopted by:
Type : VX9000
System Name : VX9000-BEMOL
MAC address : 00-0C-29-3C-EA-66
MiNT address : 12.3C.EA.66
Time : 0 days 00:48:49 ago

Mint ping from AP to VX9000:

MiNT ping 12.3C.EA.66 with 1473 bytes of data.
Response from 12.3C.EA.66: id=16777216 time=4.720 ms
Response from 12.3C.EA.66: id=33554432 time=5.089 ms
Response from 12.3C.EA.66: id=50331648 time=5.722 ms

MiNT ping 12.3C.EA.66 with 1500 bytes of data.
Response from 12.3C.EA.66: id=16777216 time=4.531 ms
Response from 12.3C.EA.66: id=33554432 time=4.667 ms
Response from 12.3C.EA.66: id=50331648 time=4.762 ms

Auto provisioning police - Ok!
Profile ap7632 w/ controller host - Ok
Option 191 - Ok!
Native VLAN for MLCP - Ok!
MTU - Works fine.

Any idea?

Problem w/ this version on AP7632? WiNG Version: 5.9.1.5

I Checked profile, deleted adopted APs, reboot VX9000. Not sucess.

I'm planning to update to 5.9.3.1 04-Feb-2019. I can post feedback here, again.

Thanks

1 reply

Userlevel 2
Hello Richard,

I saw many bug fixes for ap7632 until 5.9.3.1.
I'll suggest to update, if you can.

Regards,

Aviv

Reply