AP8432 PoE Out GE2


for AP8432 the PoE output via GE2 its not working, do I need to configure it or is enabled by default. BR

7 replies

Userlevel 4
You need to have 3at power to power up the AP and they you do need to configure poe out on ge2.
Alona wrote:

You need to have 3at power to power up the AP and they you do need to configure poe out on ge2.

thanks for your answer.
Im using the PoE AP-PSBIAS-2P3-ATR but the GE2 cant power an AP7532.

BR
Userlevel 3
can you add the command on GE2

power best-effort
Andrew Blomley wrote:

can you add the command on GE2

power best-effort

any other option to make it work?

BR
yes i did it but this message appears:
ap8432(config-device-if-ge2)#power best-effort
% Error: POE power best effort configuration not available on device type [ap8432].

thank you for your support
Userlevel 3
I don't have the AP8432, but tested the following on the AP7612

ap7612-3B376E(config-profile-default-ap7612)#service power-config 3af-out
ap7612-3B376E(config-profile-default-ap7612)#com w

the power then come up

sorry for the delay

needed to find the AP
Yey!!!! its working!!! thank you so much, i will use more "The HUB"

BR

Reply