Header Only - DO NOT REMOVE - Extreme Networks

Configuring WM3600 Wireless Controller From Scratch


I need some help configuring the WM3600 from scratch. I already have another Wireless controller on the network. I am getting IP from a DHCP server for internet which is on VLAN 60. I have like 20 AP for my wireless controller. I would love to get some help configuring the Wireless controller to work with my existing network. I need some help to configure the controller from Scratch.

Thanks in Advance.

2 replies

Userlevel 5
Zaffry,

I hope this HUB link would be helpful for you.

https://community.extremenetworks.com/extreme/topics/how-do-i-create-an-ssid-with-only-internet-acce...

In addition to it, here is the guide for basic controller configuration:-

https://www.dropbox.com/s/4kb5p5rl1ycxakl/SVC%20Tech%20Implementation%20Guide%20WM3000%20Series%20SW...
Vellachery, Sumeesh wrote:

Zaffry,

I hope this HUB link would be helpful for you.

https://community.extremenetworks.com/extreme/topics/how-do-i-create-an-ssid-with-only-internet-acce...

In addition to it, here is the guide for basic controller configuration:-

https://www.dropbox.com/s/4kb5p5rl1ycxakl/SVC%20Tech%20Implementation%20Guide%20WM3000%20Series%20SW...

The Internet in My Network flows through Vlan 60. So should i add my controller and the access points on VLAN60 as well ?

Reply