Header Only - DO NOT REMOVE - Extreme Networks

How to block client use Wing 5.8


Hi Everybody

I'm using AP7161 with FW WIng 5.8. How to block 1 client in the network?

Thanks you

8 replies

Userlevel 4
Create an association ACL and apply to SSID...
association-acl-policy CLIENT-BLACKLIST
deny xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx precedence 1
permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000
Userlevel 5
Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,
Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

Hi you,

Thank for help, but is there a way to quickly copy the MAC address you want to block? The WING interface uses Adobe Flash so it can not be copied
Userlevel 4
Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

Use he CLI...
Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

Thanks Say Weir, but I'm pretty poor at using CLI, I often use more interfaces.
Userlevel 4
Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

In the GUI...
Configuration Tab
Wireless tab
Association ACL - Create one to deny the MAC. Be sure to do a permit at the end for all others (permit 00-00-00-00-00-00 FF-FF-FF-FF-FF-FF precedence 1000)

Once created...
WLAN Tab
select the SSID to apply ACL to
Expand the list of options for the WLAN
Select Firewall
then look for association ACL and enter the name of the ACL you created above to deny the MAC. Apply and save.

How to do via GUI.....
I prefer to use the CLI as it is much quicker. Download the Command reference guide for WiNG. All CLI commands are there. Very easy to use.
Good luck.
Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

Hi you

I created MAC firewall rules but client still connection. I try created IP Firewall rules but still not successful. Can you help me
Thank you

I


Bin wrote:

Hi,

You could configure MAC Firewall Rules to block the client.

1. Select Configuration > Security > Wireless Firewall > MAC Firewall Rules
2. Add new Row to create MAC firewall Rule to Deny the traffic



3. Apply the rule on WLAN

Best regards,

hey i need help... Please tell me how to disable client auto blocking in rfs7000 (WIPS ) ...

Reply