Header Only - DO NOT REMOVE - Extreme Networks

How to set the rssi threshold to roaming

  • 3 June 2019
  • 2 replies

Hi you

I have 2 questions:
  1. I use Wing 5.9 and i want set RSSI threshold to roaming. Currently client have RSSI -80 still has not moved to another AP.
  2. What is 2 red AP?

2 replies

Userlevel 4
Hi Tuan,

Before attempting to modify rssi threshold.
Have you confirmed that you do not have an overly large cell size?
Typically because the power is set too high and the lower data rates are still enabled this prompts sticky clients especially on 2.4 band.

The link to the best practice guide will have the info you are looking for.
Userlevel 4
Hi Tuan,

To answer for your question no.2, the red color indicates that the AP has some core files or crash files stored. This is not indicating any service imapct and this is the same symbol with "*" that you could see next to the hostname when you login to the AP.

If you already recognized the crash information, then you can clear it with "service clear crash-info" command after login to the AP, then the red color should disappear after few minutes.