Header Only - DO NOT REMOVE - Extreme Networks

How to turn on radion on AP7161 Wing 5.7


Hi everybody

My radio is off, how to turn it on.

Thank you!

7 replies

Userlevel 5
Tuan Nguyen,

Could you please check if the two-digit country code is set in the RF Domain?

The country code must be set accurately to avoid a device's illegal operation, as device radios transmit in specific channels unique to the country of operation.


Vellachery, Sumeesh wrote:

Tuan Nguyen,

Could you please check if the two-digit country code is set in the RF Domain?

The country code must be set accurately to avoid a device's illegal operation, as device radios transmit in specific channels unique to the country of operation.


Thank you

I chose the country and got a wifi signal, but country have only usa while my other devices have a lot of options. My mesh use country canada-ca.



Orther device

Userlevel 5
You also need to have a WLAN mapped to the radio.
Userlevel 2
Robert Zarzycki wrote:

You also need to have a WLAN mapped to the radio.

Mapping the WLAN to the radio can be done either at the AP profile or as a device override.
Userlevel 7
If you look on the first screenshot you'd see that it's a US model.

I'm not a WiNG expert but I'd assume that a US model only supports country US.... at least that would make sense 🙂

I've found that list in the install guide online...

Ron wrote:

If you look on the first screenshot you'd see that it's a US model.

I'm not a WiNG expert but I'd assume that a US model only supports country US.... at least that would make sense 🙂

I've found that list in the install guide online...



Thank you

True is my product code is US, can it work reliably with systems use Ap-7161-WR
Userlevel 3
Ron wrote:

If you look on the first screenshot you'd see that it's a US model.

I'm not a WiNG expert but I'd assume that a US model only supports country US.... at least that would make sense 🙂

I've found that list in the install guide online...



Tuan,

The country code specifies what channel and power levels are allowed to be configured on the radios. Using the wrong country code in your country may be illegal. Check with your local regulatory authorities first.

As a general rule, -US product code are to used and sold solely in the USA.

Reply