Extreme Networks Homepage Extreme Networks Homepage

ExtremeWireless (WiNG)

This group is for the SummitWM 3000 series Wireless Controllers, the products that were formally part of Zebra WiFi, and the associated Access Points.

  • 1,046 Topics
  • 5,170 Replies

1046 Topics

R
RWCampbell New Member

adoption lost after 20 seconds. Layer 3 connectivity normal
Question

Randomly it seems that 1/3rd of our AP's have become un-adopted and no longer function. We have found that when restarting the controller, all the AP's reconnect. But a subset of them un-adopt after 20 seconds or so. Perhaps notably the controller is running v5.5. We want to upgrade this to the late...

232 17
C
Rank
3 days ago
R
Roman Yusupov Participator

RFS4000 adopts AP7562 and unadopts it instantly
Question

Hello guys! Can you help me with this question? Im running RFS4000 and adopt 1 AP7562 as Root directly connected to RFS. When I try to adopt another AP via Mesh network, I see it adopted for 1 second and then it unadopts back. It happens continiously. AP doesn't even upload config from RFS. First...

308 17
C
Rank
23 days ago
Richard Augusto Participator

Smart RF Power Calibration?

Hello, I would like to know why in some RF-Domains the APs adopted in that RF-Domain ignore the minimum and maximum power values. In an RF-Domain for example, I see that all Access Points are operating at full power. Is there a calibration process to be done?

600 17
11 months ago
N
Niyas New Member

How to adopt standlone AP 7502 to wing controller vx9000

Hi, we have extreme AP 7502 and controller VX9000. we need to adopt AP 7502 to vx9000.we are working on the local/standalone platform.

452 17
C
Rank
1 year ago
T
Tuan Nguyen New Member

Up FW AP7161

I have 9 AP 7161 with Wing 5.7. I just got a warranty 1 AP with Wing 5.6. Can you help me upgrage to Wing 5.7 Thanks you

316 17
T
2 years ago
J
Jeff Lanza New Member

How does WiNG Captive Portal (RADIUS) authentication work with locally bridged (self) mode and external captive portal web pages?

I'm operating a WiNG wireless controller to manage remote APs. I'm attempting to setup external captive portal pages, and in order to have the APs handle the captive portal capture and redirection process (and RADIUS authentication) without tunneling traffic through the controller. So far, the set...

1425 17
C
1 year ago
S
Son Nguyen Participator

AirDefense Services Platform available appliances ?

Hi everyone, Could ADSP be run in an hardware appliance or integrated in software like VX9000? Thanks.

306 16
S
2 years ago
P
Patrick Koppen New Member

Download Extreme MIBS?

I'm looking for mibs for all Extreme products (EOS, EXOS, Wing, IdentiFi, ...). I found the following link: http://www.extremenetworks.com/support/policies/mibs/ The are MIBS for EOS. The link for EXOS points to old esupport. Where can I find MIBS for EXOS, Wing, IdentiFi.....?

1493 16
P
2 years ago
P
Perimeterwatch New Member

AP 6532 wont adapt to RFS6000
Question

I purchased a used AP6532 online. IT just arrived today and I plugged it directly into the RFS 6000 to adapt it and give it the necessary configuration. However, once I plugged it in, nothing new popped up in the controller's GUI. The lights on the AP are flashing both amber and green. How shou...

523 15
Rank
8 months ago
A
Abner Saul Marroquin Enriquez New Member

Configuración de rfs 4000

Tengo un rfs4000 wing 5.8 con 6 ap's 6521 con versión 5.8.0 y funcionan correctamente pero ahora tengo que agregar 2 ap's 7522 con Wing 5.9.4. pero no los adopta mi rfs que tengo que ha enviado que tengo que configurar

512 15
A
1 year ago
S
Sean Tutor Participator

Default username and password WM3400 4.3.1.0

Just got a Controller and did a factory reset on it. However it seems the normal username and password combinations aren't working. Anyone know the default username and password for a WM3400 running 4.3.1.0-022R would be? I've tried admin admin admin abc123 admin

1001 15
C
Rank
1 year ago
J
Jose_LV Participator

How to restart database in NSight server

Hi I have a vx9000 with Nsight installed. Today I have not been able to enter Nsigh showing me the following error: communication error. The sh nsight status command shows the following: Nsight is enabled Nsight report and aggregation daemon is running Nsight alarm daemon is running Nsigh...

422 15
A
Rank
1 year ago
Eric Burke Contributor

AP7562 Orientation - Radio 1 up or down?

In the prior Motorola version of this AP, I believe there was some reason for mounting the radios in a specific fashion (R1 up/down versus R2 up/down). It may have been that you could only assign certain frequencies to a given radio and that they were somehow biased. Does anyone know if this is an...

312 15
T
1 year ago
J
Jose_LV Participator

ap7522e can be adopted by a wing 5 controller?

I have an ap 7522E with Wing Express. Can this ap be adopted by a controller with a Wing 5 version (no express)? Is ap 7522e capable of changing firmware for ap7522 (not express)? Thanks

276 15
J
1 year ago
T
Tuan Nguyen New Member

Use any controller for 10 Ap 7161 vs 5 Ap 7562

Hi everybody I have 10 Ap7161 and 5 Ap7562 use wing 5.8, What controller do I have to use? Thank you

259 15
C
Rank
2 years ago
Rank
Drew C. Community Manager

New Community Categories!

15 15
R
4 years ago
S
Stefan Jacoby New Member

The future of the AP7522

Hello, has anyone some information about the future of the AP7522? Is there already a EoS or EoL announcement? I am asking because me was told that the AP7632 should/would be the successor of the AP7522. Regards, Stefan

726 14
3 months ago
J
Jose_LV Participator

nsight vs e-guest

Hi everyoneI have 3 doubts in which I needed you to help me -I have a vx9000 installed with Nsight. Could I export the Nsight database to be treated by third-party software? Would it be exported from here? -And on the other hand, I'm looking to replace Nsight with ExtremeGuest and I needed to kno...

350 14
J
11 months ago
A
Alessandro Imbrosciano New Member

Firmare 5.8.5 -> RFS7000, AP6511, AP7522, AP7602, AP7612, AP7622

Goodmorning everyone, this is my first post on this forum. Thanks for any availability. As indicated in the subject I was commissioned to upgrade the real for an existing structure. The current firmware is 5.8.4.1 and I was asked to upgrade to 5.8.5. I could not find compatibility for all antennas....

2149 14
C
Rank
1 year ago
J
Jose_LV Participator

list of aps serial number from rfs

Hi Is there any way to get a list of aps and serial numbers from a controller rfs with wingOS? I tested with the Asset Discovery Tool but through vpn it does not work. Thanks.

540 14
S
1 year ago
V
Vimalraj Veerabathiran New Member

VX9000 total wireless LANs ?

Hi guys, Bonjour, Please help me that, in VX9000 total of how many WLANs can able to add .?

403 14
S
1 year ago
G
Gary Hartstone New Member

Controller Assisted Mobility

Seeking any feedback on the "Controller Assisted Mobility" feature which can be enabled on WLAN>Client Settings. I have a older Distribution Center site running 2 RFS7000s. Site has 3 buildings assigned to their own unique RF Domains. Building 1 has 60 AP621s, Building 3 has 30 AP621s and Building 3...

320 14
A
Rank
2 years ago
D
Rank
Dimitri Corzano Extreme Employee

Hi my name is Dimitri , I am new to the Hub. Just wanted to say hi

14 14
E
2 years ago
J
Jamiea New Member

How do you Bar devices from a Wireless Manager WLAN

Hi we broadcast a Guest SSID with a low value passkey, the idea is that most people can use it. However we have some folk who like to abuse this facility. Is there any way to bar users, using the mac address perhaps ?

262 14
J
2 years ago
Eric Burke Contributor

Adoption of WiNG based wireless on untagged VLAN

I've got a site with about 150 WiNG based AP's. They adopt on V67 and as such, this is the default untagged vlan for each port they're connected to. For some reason, when I tell the AP's that this is V67 (as opposed to 1) in their profiles, they don't provision. So they think that the untagged port...

488 14
S
2 years ago
Back to top