Is there a guide for configuring WiNG's onboard RADIUS server?

  • 10 October 2017
  • 2 replies

Userlevel 2
Hi Do you have a guide to getting the onboard Radius server working in V5.8.5 when using DOT1X and MSCHAPV2, I have set this up and it all looks to be working but the radius times out, shows its running but I don't think it is ( this is on the RFS7000 using a mixture of 7131 and 7532 AP's ) Note: This conversation was created from a reply on: 2017-10-09: New GTAC Knowledge Articles October 01 - 07, 2017.

2 replies

Userlevel 2
Hi Phil, the two links below will help on your question.
How to configure 802.1x authentication with internal RADIUS on a WiNG controller -

How to configure a WiNG controller for 802.1x authentication with internal RADIUS, using LDAP to connect to a Windows Active Directory server -

Userlevel 4
If you use EAP-MSCHAPv2, use a certificate from your PKI, if you have a PKI. If not you need to distribute the self sign cert.

Do not disable the certificate check at your clients!