Is this log a login that can cause the controller to fail?


Jun 19 12:03:03 2017: AOR_67AC6C : %DIAG-4-CPU_LOAD: 1 minute average load limit exceeded, value is 100.0% limit is 99.9% (top processes: hsd using 96.6)
Jun 19 12:03:03 2017: AOR_67AC6C : %DIAG-4-CPU_LOAD: 5 minute average load limit exceeded, value is 100.0% limit is 98.0% (top processes: hsd using 96.5)
Jun 19 12:03:03 2017: AOR_67AC6C : %DIAG-4-CPU_LOAD: 15 minute average load limit exceeded, value is 100.0% limit is 95.0% (top processes: hsd using 96.4)

Could this cause the controller to reboot, or might it cause problems?
I also wonder if I need to upgrade the image or replace the equipment to fix this log.

3 replies

Userlevel 5
Jeon,

  • If the wired infra doesn't support CDP/LLDP, then you will need to disable it on AP profile to avoid L2 switch flooding the packets to all ports.
  • It is due to the enhancements introduced in Wing 5.5.x
Disable it on AP profile, by executing the below-mentioned command:-
  • #no cdp run#no lldp run[/code]
Userlevel 7
What version is running on the system?
Userlevel 5
Hello Jeon,

Please provide full controller model and firmware version.

Thank you,

Chris
Userlevel 4
Hello Leon,
As previously stated above, we would require the model of the WiNG 5 device, as well as the firmware version. The CPU Load could cause stability issues with the device and quite possible that there are crash files on the device, which would need to be examined by GTAC Support.

Thanks,
Chris Frazee

Reply