Header Only - DO NOT REMOVE - Extreme Networks

MESH connection


Hi HUB! could you please send to me a document or post a link with information about how configure the MESH connection? i understand the theory but i´m lost when i want to implement this solution.
I have one AP8532 and AP7532.

as always thank you for your time and support.

10 replies

Userlevel 4
You mean 8533? Mesh is not yet supported on 8533. It's coming in 5.9.2 release.
Alona wrote:

You mean 8533? Mesh is not yet supported on 8533. It's coming in 5.9.2 release.

sorry, is AP8432 with 5.9 firmware.

I have those APs for testing, i want to know the solution for future projects.
Alona wrote:

You mean 8533? Mesh is not yet supported on 8533. It's coming in 5.9.2 release.

any comments about the error "Meshpoint device parameters cannot be changed for device [ap8432] ?

Thank you for your time
Userlevel 5
MeshConnex Overview
Robert Zarzycki wrote:

MeshConnex Overview

Thank you for your support. I´m configuring a mesh point but for ap8432 appears this error message.
Could you please help me?

Userlevel 5
Hi,

Please check our configuration guide:
https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...
  • 6.6 MeshConnex Policy
  • 6.8 Mesh QoS Policy
  • 8.13 Profile Mesh Point Configuration
Best regards,
Bin wrote:

Hi,

Please check our configuration guide:
https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

  • 6.6 MeshConnex Policy
  • 6.8 Mesh QoS Policy
  • 8.13 Profile Mesh Point Configuration
Best regards,

Thank you for your support. I´m configuring a mesh point but for ap8432 appears this error message.
Could you please help me?

Bin wrote:

Hi,

Please check our configuration guide:
https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

  • 6.6 MeshConnex Policy
  • 6.8 Mesh QoS Policy
  • 8.13 Profile Mesh Point Configuration
Best regards,

suggestions?

Thank you in advance.
Bin wrote:

Hi,

Please check our configuration guide:
https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

  • 6.6 MeshConnex Policy
  • 6.8 Mesh QoS Policy
  • 8.13 Profile Mesh Point Configuration
Best regards,

Mesh is not supported on 8432/8533 until 5.9.2. Unfortunately you'll have to wait a bit for the release.
Bin wrote:

Hi,

Please check our configuration guide:
https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

  • 6.6 MeshConnex Policy
  • 6.8 Mesh QoS Policy
  • 8.13 Profile Mesh Point Configuration
Best regards,

thank you for your time, then i will wait.

BR

Reply