Multicast in AP-7522E


Userlevel 1
Hi all,
I want to configure multicast (igmp snooping) in AP-7522E. But I can't find a guide to configure it.
Help me, Plese!
Thanks

5 replies

Userlevel 4
You can configure igmp snooping under the AP profile.
Userlevel 1
Hi David Choi,
I don't have Wireless Controller. And 7522E can't configure in Enterprise Guide or CLI. i read guide "WiNG Express Manager 5.8.2", but it does not have IGMP snooping.

Link "WiNG Express Manager 5.8.2": http://documentation.extremenetworks.com/ExtremeWireless/WING_EXPRESS_MANAGER_5.8.2_UG_MN-002678-01_...
Userlevel 5
SSH into the AP and run the following commands to see if it's already enabled by default:

>show run include-factory | include ip igmp or >show context include-factory | include ip igmp[/code]You should see something like this:[/code] ip igmp snooping
ip igmp snooping forward-unknown-multicast
no ip igmp snooping querier
ip igmp snooping querier max-response-time 10
ip igmp snooping querier timer expiry 60
ip igmp snooping querier version 3
ip igmp snooping querier query-interval 60
ip igmp snooping querier robustness-variable 2
no ip igmp snooping fast-leave[/code]What do you get when you run these commands?
Userlevel 1
Hi Christoph,
I show in 7502E :

ap7502-75F4C5>show run include-factory | include ip igmp
ip igmp snooping
ip igmp snooping forward-unknown-multicast
no ip igmp snooping querier
ip igmp snooping querier max-response-time 10
ip igmp snooping querier timer expiry 60
ip igmp snooping querier version 3
ip igmp snooping querier query-interval 60
ip igmp snooping querier robustness-variable 2
no ip igmp snooping fast-leave

--> igmp snooping always enable?
Userlevel 5
Igmp snooping is not enabled by default. There is no option to enabled this setting from GUI or CLI on Express units. This can be enabled on Enterprise, but not Express APs. Have you tried enabling this setting on your switch?

Thank you.

Reply