Question

read config...............w1i2c7 write config..............w1i2c6


In AP6521 while configuring I'm getting this error, Please help me.

BootOS (c) 2004-2016 Symbol Technologies, Inc. All rights reserved.
data bus walking 1's......pass
address bus walking 1's...pass
ram device test...........pass
read config...............w1i2c7
write config..............w1i2c6
booting image2 @ 0xbf070000

U-Boot 5.4.0.0-047R ( Sep 15 2012 - 21:15:06 )

DRAM: 64 MB
Flash: 8 MB
NAND: 128 MB
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...


3 replies

try to factory reset the AP then re configure

UN:- Reset
PAS :- FactoryDefault
I tried the factory reset also.

But it's not happening.
Userlevel 4
What you presented are just boot logs. Not seeing any errors. Are you saying you are not getting a login prompt? You need to open a support case - if that's te case.

Reply