Question

SNMP related faults.I wonder if there is a way to resolve this symptom.


Model name: WM3700 (Ver.5.7.0.0-057R)
Symptom: SNMP response takes 10 seconds or more.

* If the SNMP data length is 80 or less, the response normally goes within 2 seconds
If the data length exceeds 260, the response takes more than 10 seconds.
What settings need to be set to allow fast speed response?

* Note: The firewall function is disabled.


2 replies

Userlevel 7
Hi Jeon, There doesn't appear to be any personal information in this post so I have removed the "private" flag so that others in the community can respond.
Userlevel 2
Hello Jeon,

Please provide the output of "service show process" from the controller and check process utilization.

Reply