Up FW AP7161


I have 9 AP 7161 with Wing 5.7. I just got a warranty 1 AP with Wing 5.6.

Can you help me upgrage to Wing 5.7

Thanks you

17 replies

Userlevel 2
Hi Tuan

Hi
You can download Wing AP 7161 Series v5.7.0.0 from the portal

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx?softwareid=fff36733-70f4-4450-aa8a-3660e98aa699

CLI



ap71612-A41FF4#upgrade tftp://192.X.X.X:69/AP71XX-5.8.6.0-011R.img

UI





I recommend you upgrade to the latest version available Wing 5.9
Edmundo wrote:

Hi Tuan

Hi
You can download Wing AP 7161 Series v5.7.0.0 from the portal

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx?softwareid=fff36733-70f4-4450-aa8a-3660e98aa699

CLI



ap71612-A41FF4#upgrade tftp://192.X.X.X:69/AP71XX-5.8.6.0-011R.img

UI





I recommend you upgrade to the latest version available Wing 5.9


Thanks you, but i can't creat GTAC for download.

Can you give direct link fw?
Userlevel 2
Dear Tuan,

Could you give me your email or phone number? I will support you.
Our company is Distributor of Extreme Networks in Vietnam (http://n-tek.vn/)

Thanks.
Son Nguyen wrote:

Dear Tuan,

Could you give me your email or phone number? I will support you.
Our company is Distributor of Extreme Networks in Vietnam (http://n-tek.vn/)

Thanks.

Thanks@Son Nguyen

[i]

Thanks for help
Userlevel 3
Hi Tuan,

To your question. WiNG 5.7.x up to the latest newly released WiNG 5.9.0 for the AP7161 can be downloaded from our support portal (http://www.extremenetworks.com).

I have provided a direct link to the AP7161 firmware list below. Please note you will need to register on our support portal, also, active device entitlement is required for software downloads.

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx
Daniel Mejia wrote:

Hi Tuan,

To your question. WiNG 5.7.x up to the latest newly released WiNG 5.9.0 for the AP7161 can be downloaded from our support portal (http://www.extremenetworks.com).

I have provided a direct link to the AP7161 firmware list below. Please note you will need to register on our support portal, also, active device entitlement is required for software downloads.

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx

Thank you

I can't creat GTAC for download on www.extremenetworks.com, if possible you can upload to google driver, dropbox, ... for me.

I have 10 AP7161, how to update the firmware at the same time. I am using a virtual controller.
Userlevel 5
An active device entitlement (contract for AP) is required for software downloads.
I have just successfully updated fw, however it only updates for Secondary. How to update to Primary. I have booted in Primary and up fw but not.
Userlevel 5
Try booting from partition you want to upgrade and run the upgrade command again.
Userlevel 5
CLI command to choose boot partition:
#boot system
primary Primary image
secondary Secondary image

# reload
Robert Zarzycki wrote:

CLI command to choose boot partition:
#boot system
primary Primary image
secondary Secondary image

# reload

Dear sir
I have booted into primary an up fw, but still fw 5.6.


Userlevel 5
Robert Zarzycki wrote:

CLI command to choose boot partition:
#boot system
primary Primary image
secondary Secondary image

# reload

Can you run CLI command 'sh upgrade-status' and provide output.
Userlevel 5
Robert Zarzycki wrote:

CLI command to choose boot partition:
#boot system
primary Primary image
secondary Secondary image

# reload

also ' sh upgrade-status detail '
Userlevel 4
Robert Zarzycki wrote:

CLI command to choose boot partition:
#boot system
primary Primary image
secondary Secondary image

# reload

It does not matter what partition the AP is booted in. WiNG 5 devices allow unused partition for staging purposes and to reload at a later date. If you wish to boot into v5.7.0 (highly recommend v5.8.6.1 or v5.9.0), from the CLI, perform the followng:

enable [enter]
boot system xxxxx [enter] (xxxx represents primary or secondary partition)
reload [enter]

AP will boot into the partition you selected for next boot.

Again, it does not matter what version is in what partition. Only what partition you are booted in.
Hi everybody

I have 9 AP 7161 use fw wing 5.7, I voted 1 ap to VC. I want to upgrade all at once to wing 5.8 or 5.9.

Please help me.

Thank you

Userlevel 5
Via CLI run command "device-upgrade all " See article : https://gtacknowledge.extremenetworks.com/pkb_mobile#/articles/en_US/How_To/How-to-upload-Wing-5x-AP-firmware-image-to-Wing-controller
Thank you

What updates have affected System Profile because my system is working. Do I have to reconfigure?

Reply