Header Only - DO NOT REMOVE - Extreme Networks

VX9000_DEMO_WiNG_v5.8.6.5


Userlevel 1
Hi all,
I have VX9000_DEMO_WiNG_v5.8.6.5 and (1) AP-7532 and (1) AP-7522. I setup VX9000_DEMO in VMware Workstation. VX9000, AP7532, AP7522 are configured same network (192.168.1.x/24). AP-7532, AP-7522 were shown on VX9000. I configured and added profile for AP-7532, AP-7522 on VX9000. AP-7522 received profile but AP-7532 did not receive profile from VX9000. Why?

Help me please.
Thanks

4 replies

Userlevel 5
It's possible that the AP-7532 is not adopted. Can you provide output of CLI command ' show adoption status'
Userlevel 5
Can you provide the full model & firmware version of the AP7532 by providing out put of CLI command ' show version' from the AP.
Userlevel 3
As Rob stated it may not have adopted, but also, it may have adopted wit a status of othter than configured.

If you see VERSION MISMATCH, confirm the firmware for the AP is loaded on the Controller.

If you see ERROR, it means that the configuration you uploaded to the AP from the controller to the AP, caused it to loose connectivity to the Controller and it reverted back to the last known good configuration
Userlevel 5
Hi Long, using "show adoption log adoptee" on AP will give you more information

Reply