Solved

AP310/410/i/e LED description

  • 29 January 2021
  • 6 replies
  • 87 views
M

Hi,

 

I'm probably missing something but I cannot find LED indicator placement on new APs (310/410). In the installation and quick reference guides is only a table with colour description and "The LED indicators are located on the front face of the access point but are not visibly marked.” note. But which LED is which ???

 

Regards,

Mike  

icon

Best answer by Christoph S. 29 January 2021, 16:04

View original

6 replies

C
Rank
Userlevel 6

Hello Mike,

 

This may help:

https://extremeportal.force.com/ExtrArticleDetail?an=000084323

 

Thank you

Christoph
M

That's exactly what I was looking for. Thank you - there is one thing missing, no ? Both AP4xx and AP5xx have 3 radios and the article shows only two (that means it's for AP3xx)

C
Rank
Userlevel 6

Hello Mike,

 

1 - 2.4 GHz radio

2 - 5 GHz radio

3 - Sensor

 

Of course you can have Radio Modes SSR, but 3rd radio can’t be either 2.4 or 5 GHz. 

 

Rgds,

 

 

Christoph
M

https://documentation.extremenetworks.com/wireless/QRG/AP410ie_QuickRef.pdf?_ga=2.132958861.264424451.1611823492-1483736301.1599043077

 

There are 3 radios and Bluetooth (as Radio 4 in that case?) mentioned. Radio 3 is usually sensor

M

@Christoph S. there is another thing missing in description: AP Status LED Green blinking - AP is Virtual Controller (or RF domain manager?) 

C
Rank
Userlevel 6

Hello Michal,

 

Just tested, looks like VC status. The LED was blinking green under these conditions:

 virtual-controller
 no rf-domain-manager capable
 

Will modify article accordingly. 

 

Thank you,

 

Chris

Christoph

Reply