Question

AP7562 cyclic reboot

  • 22 February 2021
  • 7 replies
  • 47 views

Регулярно перезагружается AP7562.
Вот что пишет в консоли:

process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 961) exited. Scheduling for restart.
Feb 22 07:09:32 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 961) exited. Scheduling for restart.
Feb 22 07:09:34 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:09:35 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:09:35 2021: %USER-0-EMERG: Unspec[900]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 997) exited. Scheduling for restart.
Feb 22 07:09:36 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 997) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1052) exited. Scheduling for restart.
Feb 22 07:09:39 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1052) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 900) exited. Scheduling for restart.
Feb 22 07:09:39 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 900) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1073) exited. Scheduling for restart.
Feb 22 07:09:39 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1073) exited. Scheduling for restart.
Feb 22 07:09:41 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:09:42 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1109) exited. Scheduling for restart.
Feb 22 07:09:42 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1109) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1134) exited. Scheduling for restart.
Feb 22 07:09:42 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1134) exited. Scheduling for restart.
Feb 22 07:09:42 2021: %USER-0-EMERG: Unspec[1091]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1152) exited. Scheduling for restart.
Feb 22 07:09:45 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1152) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 1091) exited. Scheduling for restart.
Feb 22 07:09:48 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 1091) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1185) exited. Scheduling for restart.
Feb 22 07:09:48 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1185) exited. Scheduling for restart.
Feb 22 07:09:51 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:09:51 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1224) exited. Scheduling for restart.
Feb 22 07:09:51 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1224) exited. Scheduling for restart.
Feb 22 07:09:52 2021: %USER-0-EMERG: Unspec[1206]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1249) exited. Scheduling for restart.
Feb 22 07:09:54 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1249) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 1206) exited. Scheduling for restart.
Feb 22 07:09:58 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 1206) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1282) exited. Scheduling for restart.
Feb 22 07:09:58 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1282) exited. Scheduling for restart.
Feb 22 07:10:00 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:10:01 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1321) exited. Scheduling for restart.
Feb 22 07:10:01 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1321) exited. Scheduling for restart.
Feb 22 07:10:01 2021: %USER-0-EMERG: Unspec[1303]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1346) exited. Scheduling for restart.
Feb 22 07:10:04 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1346) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 1303) exited. Scheduling for restart.
Feb 22 07:10:07 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 1303) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1379) exited. Scheduling for restart.
Feb 22 07:10:07 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1379) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1418) exited. Scheduling for restart.
Feb 22 07:10:07 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1418) exited. Scheduling for restart.
Feb 22 07:10:09 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:10:10 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1440) exited. Scheduling for restart.
Feb 22 07:10:10 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1440) exited. Scheduling for restart.
Feb 22 07:10:10 2021: %USER-0-EMERG: Unspec[1400]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1463) exited. Scheduling for restart.
Feb 22 07:10:13 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1463) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 1400) exited. Scheduling for restart.
Feb 22 07:10:16 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 1400) exited. Scheduling for restart.
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1496) exited. Scheduling for restart.
Feb 22 07:10:16 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1496) exited. Scheduling for restart.
Feb 22 07:10:19 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Feb 22 07:10:19 2021: ap7562-76F008DTemp : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1535) exited. Scheduling for restart.
Feb 22 07:10:19 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1535) exited. Scheduling for restart.
Feb 22 07:10:20 2021: %USER-0-EMERG: Unspec[1517]: rim: ASSERT FAIL [cfg.c:114] Aborting...
process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1560) exited. Scheduling for restart.
Feb 22 07:10:22 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/lighttpd -D -f /etc/lighttpd.conf' (pid 1560) exited. Scheduling for restart.
process '/usr/sbin/rim -d' (pid 1517) exited. Scheduling for restart.
rebooting system because process "/usr/sbin/rim -d" exceeded max count
Feb 22 07:10:25 2021: %DAEMON-1-ALERT: init: process '/usr/sbin/rim -d' (pid 1517) exited. Scheduling for restart.
Feb 22 07:10:25 2021: %DAEMON-1-ALERT: init: rebooting system because process "/usr/sbin/rim -d" exceeded max count
The system is going down NOW!
Feb 22 07:10:36 2021: %DAEMON-1-ALERT: init: The system is going down NOW!
Requesting system reboot
Restarting system.

 read config...............w1i1c7
write config..............w1i1c6
booting image1 @ address 0x1c020000


U-Boot 5.9.1.0-029R (Sep 26 2017 - 12:45:26)

I2C:   ready
Wait.
Done.
DEV ID= 0000cf12
SKU ID = 0
OTP status: eca00018
MEMC 0 DDR speed = 800MHz
Log: ddr40_phy_init.c: Configuring DDR Controller PLLs
Log: offset = 0x18010800
Log: VCO_FREQ is 1600 which is greater than 1Ghz.
Log: DDR Phy PLL polling for lock
Log: DDR Phy PLL locked.
Log: ddr40_phy_init::DDR PHY step size calibration complete.
Log: ddr40_phy_init:: Virtual VttSetup onm CONNECT=0x01CF7FFF, OVERRIDE=0x00077FFF
Log: ddr40_phy_init:: Virtual Vtt Enabled
Log: DDR Controller PLL Configuration Complete
PHY register dump after DDR PHY init
PHY register dump after mode register write

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S300001EB
000014E0


RDLYW0 00000005

RDENW0 00000050

RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
 01 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 02 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 03 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 04 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
 05 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 06 ----------++++++++++++++++++++++++X++++++++++++++++++++++++-----
 07 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 08 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 09 --------------------++++++++++++++++++++++X+++++++++++++++++++++
 10 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 11 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 12 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 13 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 14 ----------+++++++++++++++++++++++++++X+++++++++++++++++++++++++-
 15 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----
 01 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 03 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 04 --++++++++++++++++++++++++++++X+++++++++++++++++++++++++++------
 05 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 06 ----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----
 07 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 08 ------+-++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 09 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 10 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 11 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 12 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 13 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 14 ----++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-
 15 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
 01 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 02 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 03 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 04 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
 05 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 06 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
 07 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 08 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 09 --------------------++++++++++++++++++++++X+++++++++++++++++++++
 10 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 11 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 12 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 13 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 14 ----------+++++++++++++++++++++++++++X+++++++++++++++++++++++++-
 15 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ++++++++++++++++++++++++++X+++++++++++++++++++++++++-------++++-
 01 ++++++++++++++++++++++++++X+++++++++++++++++++++++++----------+-
 02 ++++++++++++++++++++++++++X++++++++++++++++++++++++++---------+-
 03 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 04 ++++++++++++++++++++++++++X+++++++++++++++++++++++++--------+++-
 05 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 06 ++++++++++++++++++++++++++X+++++++++++++++++++++++++--------+++-
 07 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 08 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 09 ------+++++++++++++++++++++++X+++++++++++++++++++++++-----------
 10 --+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 11 -----++++++++++++++++++++++++X+++++++++++++++++++++++-----------
 12 -++++++++++++++++++++++++++X+++++++++++++++++++++++++---------+-
 13 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 14 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-------+++-
 15 ----++++++++++++++++++++++++X+++++++++++++++++++++++------------


WRDMW0 00000026
WRDMW0 00000027


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -+++++++++++++++++++S+++++++++++X+++++++++++++++++++++++++++++++

DRAM:  512 MiB
NAND:   cs 0 dev_id word 0 c2dc9095
MX30LF4G18AC (ONFI),
ONFI info: device 512MB, page 2048B, oobsize 64B, block 128KB,
           col-addr 2, row-addr 3, 8-bit
Found strap type 0x2 strap page 0x1
REG_ACC_CONTROL c1040010 spare_area_bytes 10 ecc_level 4 eccbytes 7 steps 4
REG_CONFIG 27152300
128 KiB blocks, 2 KiB pages, 16B OOB, 8-bit
NAND:    user oob per page: 34 bytes (4 steps)
NAND:  device size 512 MiB
No card in PCIe port 0
Card detected in PCIe port 1
In:    serial
Out:   serial
Err:   serial
Loading runtime image 1. Press ESC to abort.  0
boot config w1i1c6 -booting linux1/rootfs1
## Booting kernel from Legacy Image at a1007fc0 ...
   Image Name:   Linux-2.6.35.9-ws-symbol
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4128896 Bytes = 3.9 MiB
   Load Address: a1008000
   Entry Point:  a1008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Welcome.
ls: /sys/block/*da/uevent: No such file or directory
restoring /etc2/./config_version
init_dataplane_time - Done
init_instrumentation - Done
init_logging - Done
init_messaging - Done
init_thread_to_thread_messaging - Done
init_crypto - Done
Fixing tree-node configuration
Running Primary software, version 5.9.1.0-029R
Alternate software Secondary, version 5.9.8.3-003R
Software fallback feature is enabled
Starting daemons...,....,,,
Waiting for system initialization to complete
 

After resetting to factory settings, it accepts the configuration from the controller, but it still reboots.
Updated to version AP7562-LEAN-5.9.8.3-003R - reboots have not gone anywhere. The controller (RFS-4000) and other devices are also flashed to version 5.9.8.3-003R.

 


7 replies

Userlevel 6
Badge

Hi Ogrius,

 

If it’s an issue with one of many APs, I’d recommend to call GTAC so they can help you figure it out or RMA it if it’s something bigger: https://www.extremenetworks.com/support/contact/

 

Hope that helps,

Tomasz

Userlevel 6

Ogrius,

As a test, create another management policy just for the APs and disable the HTTPS option and then apply that new management policy to the APs profile(s).

If these APs are running LEAN images, they don’t have GUI access anyway, so it shouldn’t be an issue.

If the rebooting stops with HTTPS disabled, open a case with GTAC and provide these testing results.

I have come across this. Error due to band 5ghz, try to turn off the 5ghz band and try again

I have come across this. Error due to band 5ghz, try to turn off the 5ghz band and try again

So it reboots even in the default configuration. I will try, of course, to turn off 5 GHz.

Hi Ogrius, 

Did you check the adoption logs “show adoption log adopter” on the controller to see what’s causing the un-adoption? you can also run “show log adopter adoptee” on the AP console to check the adoption log on the AP. 

 

Regards,

Ovais   


small typo in second command...

show adoption log adopter and

show adoption log adoptee

:slight_smile:

 

Userlevel 5

Hi Ogrius, 

One of the reasons could be that the AP does not like some part of the configuration, for example, a feature/function not supported or not configured properly. Did you check the adoption logs “show adoption log adopter” on the controller to see what’s causing the un-adoption? you can also run “show log adopter adoptee” on the AP console to check the adoption log on the AP. 

If you can send the running-config, that would be helpful too. 

 

Regards,

Ovais   

Hello.
This is a problem with only one AP.
The rest are working fine.
I don't have time to do something in the console.
It also behaves when it is reset to factory settings.
I set the configuration for it based on existing and working profiles.
Only the IP address changed.

Reply