Solved

Apoyo para configurar alarmas cuando se ajusta algún radio o potencia

  • 21 April 2021
  • 2 replies
  • 25 views

Buenas tardes 

Me podrían apoyar de favor me solicita un cliente la configuración de alarmas en una controladora NX5500, el requerimiento es configurar en la controladora que llegue una alarma cuando se ajusta un canal en los radios o se ajuste la potencia.

Existe este tipo de alarma,  y como la puedo configurar.

Actualmente tiene configurados esta politica de eventos:

event-system-policy "Cedis Queretaro"
 event system login-fail snmp off
 event ap ap-unadopted snmp on email on
 event diag high-temp snmp on email on
 event diag low-temp snmp on email on
 event diag pwrsply-fail snmp on email on
 event device device-autoup-reboot snmp on email on
 event diag under-voltage snmp on email on
 event device adopted snmp on email on
 event device adopted-to-controller snmp on email on
 event diag fan-underspeed snmp on email on
 event system login email off
 event device reset snmp on email on
 event ap ap-reset-detected snmp on email on
 event diag over-voltage snmp on email on
 event device unadopted snmp on email on
 event diag cpu-usage-too-high-recover snmp on email on
 event diag cpu-usage-too-high snmp on email on

icon

Best answer by Ovais Qayyum 22 April 2021, 01:59

Hi Victor, 

The alarm events you are looking for are available under “Smart-RF” events. Please see below:

 

You can also refer to the following article for more details around how to configure and apply the event system policy to the controller:

https://extremeportal.force.com/ExtrArticleDetail?an=000090652&q=WiNG%20event%20system%20policy

 

Regards,

Ovais 

View original

2 replies

Userlevel 5

Hi Victor, 

The alarm events you are looking for are available under “Smart-RF” events. Please see below:

 

You can also refer to the following article for more details around how to configure and apply the event system policy to the controller:

https://extremeportal.force.com/ExtrArticleDetail?an=000090652&q=WiNG%20event%20system%20policy

 

Regards,

Ovais 

Muchas gracias por el apoyo

Reply