Header Only - DO NOT REMOVE - Extreme Networks

Display individual stacked SecureStack Switch / Firmware Status


Userlevel 3
Article ID: 5455

Products
SecureStack C3
SecureStack C2
Matrix C2
SecureStack B3
SecureStack B2
SecureStack A2

Commands
'dir'
'show version'
'show switch'

Goals
Display individual stacked switch status
Determine firmware version for each stacked switch

Solution
On the SecureStack C3/B3/B2/A2, and with SecureStack C2 firmware version 2.01.37 and higher, dual firmware images are supported. The 'dir' command reflects this by displaying both the currently selected image and the older image to be overwritten upon the next firmware download operation, for the master unit only.

A 'show version' and/or a 'show switch' command will both show currently selected firmware information for all units of a SecureStack standalone/stack.
Matrix C2(ro)->dir [C2 firmware 2.01.24 and lower]

Files: Size
================================ ========
configs:
johnm2.cfg 3173
testc2.cfg 3173
johnm.cfg 56421

logs:
current.log 10001
Matrix C2(ro)->dir [C3/B3/B2/A2; and C2 firmware 2.01.37 and higher]
Images:
==================================================================
Filename: c2-series_03.01.20
Version: 03.01.20
Size: 6410240 (bytes)
Date: Fri Jun 3 10:37:06 2005
CheckSum: 35df004873035b50b0dc77f843d52af8
Compatibility: C2G124-24, C2G124-48, C2H124-48, C2G124-48P, C2H124-48P
C2K122-24, C2G170-24, C2G134-24P

Filename: c2-series_03.01.45 (Active) (Boot)
Version: 03.01.45
Size: 5818368 (bytes)
Date: Wed Jun 29 11:09:22 2005
CheckSum: f44f9bf9a41ae24d10862024ec1a21db
Compatibility: C2G124-24, C2G124-48, C2H124-48, C2G124-48P, C2H124-48P
C2K122-24, C2G170-24, C2G134-24P

Files: Size
================================ ========
configs:
johnm2.cfg 3173
testc2.cfg 3173
johnm.cfg 56421

logs:
current.log 10001
Matrix C2(ro)->show version

Copyright (c) 2004 by Enterasys Networks, Inc.

Model Serial # Versions
-------------- ----------------- -------------------
C2G124-24 040300089001 Hw:BCM5695 REV 1
Bp:01.00.17
Fw:01.01.11

Hw:BCM5695 REV 1
Bp:
Fw:01.01.11
Matrix C2(ro)->show switch

Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------ ------------ ------------- ------------- --------------------- --------
1 Mgmt Switch C2G124-24 C2G124-24 OK 01.01.11
2 Unassigned C2G124-48P Not Present 00.00.00

Matrix C2(ro)->[/code]
See also: 5605 and 5751.

0 replies

Be the first to reply!

Reply