Header Only - DO NOT REMOVE - Extreme Networks

N-Series with"'Fabric chip 0 Interconnect, received 0x00000001 CRC" Errors


Userlevel 3
Article ID: 10134

Products
Matrix N-Series DFE

Symptoms
The following error message samples were extracted as syslog items (7494), but they should be present in the Fault Log (5101), as well:

Matrix N5 Platinum(su)->dir slot3/logs
SEP 14 2005 21:54:16 1301 current.log
SEP 05 2005 14:50:32 262163 old.log
Matrix N5 Platinum(su)->show file slot3/logs/current.log
<165>Sep 5 14:50:12 10.20.100.1 Default[1.DHCP]dosFsLib.c : Malformed
boot sector. Offset 0, value 5.
<165>Sep 5 14:50:12 10.20.100.1 Default[1.DHCP]dosFsLib.c : Malformed
boot sector. Offset 0, value 33.
<165>Sep 5 14:50:13 10.20.100.1 Default[1.DHCP]dosFsLib.c : Malformed
boot sector. Offset 0, value 37.
<165>Sep 5 14:50:13 10.20.100.1 Default[1.DHCP]dosFsLib.c : Malformed
boot sector. Offset 0, value 1.
<165>Sep 5 14:50:13 10.20.100.1 Default[1.DHCP]dosFsLib.c : Malformed
boot sector. Offset 0, value 1.
<163>Sep 9 16:20:27 10.20.100.1 System[1]This device has encountered a
hardware failure. Fabric chip 0 Interconnect, received 0x00000001 CRC
Please contact Support for a possible repair/replacement.
<163>Sep 14 13:47:06 10.20.100.1 System[1]This device has encountered a
hardware failure. Fabric chip 0 Interconnect, received 0x00000001 CRC
Please contact Support for a possible repair/replacement.
<163>Sep 14 21:54:16 10.20.100.1 System[1]This device has encountered a
hardware failure. Fabric chip 0 Interconnect, received 0x00000001 CRC
Please contact Support for a possible repair/replacement.
Matrix N5 Platinum(su)->[/code]
Solution/Workaround
Please contact Enterasys Networks Technical Services for assistance.

0 replies

Be the first to reply!

Reply